Quote:
Originally Posted by Jeremy
The 10 Ah pack will deliver about 35 amps before the BMS current limiter kick in. This can be increased slightly, to about 40 amps, by slightly reducing the resistance of the shunt on the BMS (just a matter of applying some more solder to make the shunts a little shorter).
If you really only need 33 amps maximum, then the standard pack will be fine. The specs are on Ping's adverts, if you need confirmation of the ratings. Many have found these packs to be quite conservatively rated in practice.
Jeremy
|
I dont think your reply is right. I have looked at the spec and the only do 10 amps not 40amps. This battery is no good for any bikes that need a lot of power. Though they say they can do 40amp bursts they will NOT run at 35amps or 40amps for any lenth of time.