Work-shifts and plenty of heavy rain have kept me from fitting and testing the Mule trailer until today.
Before going anywhere I had to attach it to the bike.
The trailer is supposed to fit onto the wheel nut on the left hand side of the back wheel but that would have meant disturbing the power cables going into the back wheel - no-way was I going to mess that up.
So I made a bracket (from a part off an old trailer tent) and bolted it to the frame.
I was then able to bolt the trailer pivot to the bracket, leaving the wheel undisturbed.
Mule Trailer on Flickr - Photo Sharing!
I’ve just got to remember the trailer makes the bike set-up very wide
It's great though
.