Some answers:
1) The 36 volt setup will be better with this motor.
2) You definitely needa 20 amp setup, 10 amp is nowhere near enough for the current drain on this powerful motor.
3) This is an overspecced outfit for a 5 mile each way really, though it could be enjoyable. The only thing that worries me after the experience of the poor Torq 1 hill climbing with the 8fun in a 700c wheel is how you will manage if that hill really is steep. The Torq was specified as ok for up to 10% hills, but it gets progressivly hard work on steeper than that.
However, I'm not sure if the kit 8fun has the same internal gearing or controller torque/current setup. Perhaps others can advise on that.
.
|