[quote=flecc;35881]Later models have a five way plastic connector for the 5 Hall sensor leads, ... and three bullet connectors for the 3 power phase leads, and those are tucked away under the battery/bottom bracket/controller area with a heavy layer of insulation over them.
It does have the connectors as you describe and is insulated with heatshrink. All has gone well apart from the fact that the thread on the old Quando is NOT BMX. (There are 2 sizes of BMX, the 14T being smaller than 16+, the old Quando is neither of these). It would seem that the best I can hope for is a 16T freewheel. Unfortunately I still do not know the thread size, does anyone have any enlightenment on what it might be? It is very close to a BMX, it will take it for half a turn before going tight.
|