goldenmotor kit.

[aqs]

hi all,
just installed the kit its a 48v 500w rear with a 48v regen conttroller (i think) they dont give much info are back up support do you here me phil! anyhow connected 2 24 nimhs in series pluged in and then funny things happend the wires sort of melted,buzzing noises,batt indicater jumping from full to empty, the wheel is now lumpy to turn, have i done somthing fundamently wrong here this is my first bash is there a good site to go through the steps i could realy use some help here.
Thanks,
Al.

[flecc]

Someone asked for anyone knowing anything about these back at the beginning of July, but there were no answers then. Although I've heard of the product, I know nothing about them or their technical details. Most appear to be direct drive designs and seem to be personal import only in the UK.

If you can read French in technical matters, there's some limited mention of their technicalities on a French forum, but ultimately I think you'll have to depend on Goldenmotor.com to help you with this.

I do think it likely that there's some terminal damage to either the controller or motor windings though, judging from your description of events and the outcome.
.

[aqs]

flec'
I will keep serching for answers,this think cost to much if you get anything from the golden boys let me know!
Thanks
Al.

[flecc]

I will do Al.

The only clue I can give for when you contact Goldenmotor is that you may have got the motor coil feed leads to the controller connected wrongly, creating a dead short.

Not knowing it's controller and connections I can't help, but they should be able to make it clear what goes where.
.