Recent content by beesandsbasser

Hi thanks for help before from several members . My diy ebike has been running for about 2 years . it has now started cutting out. . I have new controller. and put on a new 810 led display , but has made no difference . the bike runs for 10 minutes then the led display shuts down, have...

Hi Wheeliepete busy day .I tried your suggestion with the red and blue wire from the controller hot wired the bike ran for a lot longer 20minutes then we stopped it. Does this mean that the led its going into automatic dormancy Can this be fixed? or will it be a new led . do you know...

Thanks I will try that first thing tomorrow

Hi how would the led know if the bike was idle?

Hi Wheelie pete we have tried disconnecting everything in stages, but led only have one, new controller tried the 36v battery from my bike cuts out .Every thing we tried runs for about 10/ 15 minutes then power loss .dont know if motor is cutting power to led or led powering down

Hi had new led because old led would not power on just keeped cutting out

Hi Wheeliepete had 41.6v from battery to controller ueeing meter when the bike cut out some thing it cutting power to the led mode unit

Hi forgot to say bike have 41.6v between battery /controller when cut out

Hi Nealh thanks for all your help troubleshooting tried all of last suggestions motor /power cut out 10/15 minutes I also tried a24v front wheel only connect 3phase wires bike still cut out 10minutes... I will look at pdf file for hall sensors where can i get replacement /parts please If your...