Recent content by Chipy

  1. C

    bafang m200

    since you flagged that have took the side cover of the motor and am getting exactly the same voltage at the terminals as the battery,be nice to find fault but alas not ,all the other connections look good with no pins bent over,
  2. C

    bafang m200

    Thanks ,looks like the battery is good then that is what it is doing
  3. C

    bafang m200

    the problem with this motor is the controller is in the motor casing and even if i swap that it s canbus so needs a BESST program to set up which is beyond my very limited computor 'skills', no local bike shop will have a go at repairing it so if anybody knows of a bafang expert in east midlands...
  4. C

    bafang m200

    Hi, thanks for the quick reply, no the display stops on ,if i watch the watts on the display it dips to about 20 although a bit difficult to see exactly then back up depending on the hill ,
  5. C

    bafang m200

    Hi folks, found the site whilst researching a fault with bafangs m200, the motor is very low mileage but when pushed it losses power for a few seconds then returns to no set pattern ,usually on higher power setting but not always. the battery rated at 36 volts charges up to 41.7 then drops to...