Recent content by CrIMiN8l

hey footpump, did you get the 30Q battery pack from eclipsbikes? how has it performed so far? i'm thinking of upgrading mine to.

Thanks guys will look into this, Just placed an order for mobilegrease 28 few days a go. Will I be ok using this on both gears for now?

Hey guys, well late on this disscusion. So I can you use mobilegrease 28 on both gears? Thanks

Ok guyz i have a 500w 36v.. i hit 28mph EASY on my first ride out.. Was pedaling but was shocked. I changed the settings and dint remember the stock settings but was draing my batter like crazy.. Sent from my iPhone using Tapatalk

Thanks d8veh. Will pick 1 up this evening..:) Just wasent sure as when I had a rear wheel motor with no brake cut outs..! I bought an inline brake cut out switch (ebay:mad:) - it malfunctioned and only lasted a week just and totaly cut my motor.

Are the gear sensors worth it? I mean most importantly 'Do they work as they should'?

Check this website out REALLY GOOD!! https://electricbike-blog.com/2015/06/26/a-hackers-guide-to-programming-the-bbs02/ I used the settings on Karl's Special Sauce an have worked great for me. Saves me allot of battery more millage. Everything is explained DO's & Dont's - you can also tweak a...

You could check the settings with your cable and not change anything, I read somewhere that allot of vendors change settings so they dont have come backs for warrenty purpose's. What I've read is allot of people are modding there settings and blowing the contoller's and asking for them to be...

Thanks will check out when I get a mo.:)

Ahh somebodys knows wat m talking about.. thanks peter. Will try then now.. Sent from my iPhone using Tapatalk

Hey Peeps, I have a 500w 36v Bafang Mid Drive motor. I purchased a programming cable to drop the Amps the conroller was pulling - was eating through my battery pretty quick! When I hooked it up to my PC I Clicked on Read 'ONLY:mad:.' I believe this did not read all the settings on all 3 pages...

Thanks d8veh, will make sure this is on my controller to.

Guys, thanks for your help, Wheeliepete - this was the article I had read through which is why I thought of changing the amps to 18 as a starting point and see how this affects everything. Then I think there would be no need to change pas settings. Like Spanos said would make a difference...

OK guys I have a question .. I have a 36v 500w mid drive bafang motor hooked up to a 36v 13amp battery. I think It eats the power from my motor real quick. I pedal most of the way! If I was to lower the amperage in from 25a to about 20 or 18, would that help? Will it cause any probs on the...

I agree even heat shrink is a good idea, maybe also a good idea to add the grease or acf50. I have added pictures of what I have done to my front brake which is vertical & my rear brake which is horizontal. Maybe I should have mounted the sensor under the downtube. You can see where I have...