harrys's latest activity

  • harrys
    harrys replied to the thread Battery help.
    You need a battery that can put out 30A. That's relatively easy with a 30Ah pack if the seller is honest. Not going to bore you with...
  • harrys
    harrys replied to the thread Battery drains fast!.
    50% after 17 miles with a 1000Wh battery? That's around 25WH/mile. You must have been averaging over 20 mph, wearing bulky clothing to...
  • harrys
    harrys replied to the thread KT LCD 3 POWER SETTINGS.
    This is why I own the LCD3, I want to see the instantaneous wattage, the ambient temperature, my miles travelled and the speed. It also...
  • harrys
    harrys replied to the thread KT LCD 3 POWER SETTINGS.
    On the LCD3, the temperature refers to a sensor inside the display. The LCD3 settings do allow for it to read a remote number from the...
  • harrys
    harrys replied to the thread KT E Bike conversion kit.
    The KT controller's throttle input looks for a voltage between .8V and 4.2V, As you go toward 4 V, you approach full throttle. Most...
    • cutaway.jpg
  • harrys
    harrys replied to the thread KT LCD 3 POWER SETTINGS.
    C5 parameter sets the current. Values between 3 and 10 10 for 100% of rated current 03 for 50% of rated current See display manual for...
  • harrys
    harrys replied to the thread KT E Bike conversion kit.
    I think you only need a 15A KT controller to run a mobility chair. Use a 24V controller too. The nice thing about KT units is that if...
  • harrys
    I've put 980 miles on my TSDZ2 since I installed it in late 2022. The VLDC5 froze on me when I tried to zero the distance, but...