Recent content by jules_wake

  1. J

    Battery problem

    Yes that was indeed the case some bad soldering on my part.
  2. J

    Battery problem

    Just to compound the issue the charger they sent actually has a label which shows it is a 42v how would that work for calculating the AH
  3. J

    Battery problem

    Unfortunately I bought the battery and motor from different sources so I'm don't think the controller option is viable. . Will see if I can get a replacement which is a pain because it took them weeks to ship in the first place.
  4. J

    Battery problem

    It's a BBS01 36v so it appears I am unwittingly overclocking. I guess the controller is still limiting the speed so I am just getting more watts than normal. I did notice on the screen it sometimes shows more than 350w so perhaps that explains why. I guess the question is should I ask for...
  5. J

    Battery problem

    I've put in a compliant on alibaba where I bought the battery so I hope they can tell me what they have sent. For sure i am not going to accept something which is possibly going to break the motor
  6. J

    Battery problem

    Yes I bought the battery from China it was cheap but had no labels or even documents so no way of telling if it is really what I ordered.. What would be the issue of using an over volted battery
  7. J

    Battery problem

    Ok I disconnected the plugs to the screen and reconnected and it seems to be working again. I would still like to know what happened and particularly whether the 53v is a problem?
  8. J

    Battery problem

    I bought a bafang 350w crank drive and a 36v 15ah rack battery. All worked fine then we went away for a week and on return when I turn on the bike the screen flashed on briefly then died. Assumed it was a flat battery so charged it for a few hours but the same problem. The battery charger...
  9. J

    bafang mid drive thumb throttle

    Thanks good to know! I bought everything from China and not one single piece of documentation.
  10. J

    bafang mid drive thumb throttle

    I've set up a 350w mid drive and so far very impressed. I also installed a thumb throttle which is the ultimate in laziness, pushed my son on his bike up a steep hill overtaking all his mates who could not understand how I was not even peddling. does the power level have any effect on...
  11. J

    Could I connect this battery to a bafang 350w

    Yes looked at that and wasn't sure it would fit on a rack. I've bought this... 36V 15AH Rear rack Lithium Battery with BMS, Charger 36V 500W Electric Bicycle POWER Akku Li-Po Li-ion 2015003615...
  12. J

    Hi - I need some help choosing a bike for my wife

    It's aluminum I thought the same but all the cables run there and it is slightly curved. In the end I've found a cheapest battery from China which can go on the rear rack
  13. J

    Could I connect this battery to a bafang 350w

    Scrub this thread - I found a better 15ah option now from China which was good value....
  14. J

    Hi - I need some help choosing a bike for my wife

    So in the end I tested a couple of bikes with hub drive and mid drive. I ended up with a mid drive 350w bafang. I was convinced by the mid drive on the basis it is more powerful and sort of felt more natural with the way it worked. Also was convinced by a sales guy that the mid drive would...
  15. J

    Could I connect this battery to a bafang 350w

    I'm looking for a low cost rack mounted 36v battery to fit a decathlon bike onto which I'm putting a mid drive. I saw this bargain battery on ebay and wondered weather I could hook it up easily. It is designed for a mifa bike...