Recent content by M245

  1. M

    Pedal assist double hall sensor is intermittent

    Hello everyone. I thought I would update you all since you all provided me with some useful advise. I'm sorry it's taken so long, but I had to buy a crank tool first before removing the left pedal crank arm and wanted to test the results properly. It transpired that when I removed the pedal...
  2. M

    Pedal assist double hall sensor is intermittent

    Hi Woosh. Thanks very much for this. I will need to buy a crank pulley so I can remove the left arm and take a look. I'll keep you all posted. Thanks again for your help and tips.
  3. M

    Pedal assist double hall sensor is intermittent

    To Nealh: Ok. Thanks very much for this. I'll have a look at this and see if this works as well. Thanks again for your help.
  4. M

    Pedal assist double hall sensor is intermittent

    Hi Nealh: What is a shim?
  5. M

    Pedal assist double hall sensor is intermittent

    To: Fordulike - I'm with you now. Thanks for the tips. I'll give it a go. Thanks again.
  6. M

    Pedal assist double hall sensor is intermittent

    Thanks for this. I'm a bit new to this, so forgive my sill question here. Are you saying that torquing the outer bolt is what is required here? It seems that this bolt is acting merely as a cover bolt. I took this bolt off and underneath, I could see the square type crank, which appears to...
  7. M

    Pedal assist double hall sensor is intermittent

    Hi, thanks for responding. In all honesty, I don't know. The arm itself seems tight with no movement. The arm itself is attached with a single hex screw/bolt. Inside is a square threaded bolt for the crank spindle itself. I don't have a crank pulley tool for this so might need to get this...
  8. M

    Pedal assist double hall sensor is intermittent

    Hello, I've got a double hall pedal assist sensor (all in one unit) as shown in the photos. There appears to be a gap between the left pedal arm and the sensor itself, which is causing intermittent power. I have tried to move it back and as close to the pedal arm as possible, but due to...