Recent content by Martin Goodwin

If you were to buy second hand what make / model would you be looking at ? Looking at a daily commuter, up to 12 miles each way. Thanks

Thanks. Good steer again. I'll talk with Peter about the viability of this project. Cheers

Again thanks. Bad practice telling off duly noted :) I shan't tell you I shorted out whilst testing the checks then;);) Quite impressive I have to say. On a serious note, I took the impulse motor to bits last night. Bearings and teeth all OK. The sprag ? clutch arms were seized and semi...

Watchmakers behind the spot weld

40.3v overall 7 X 3.97, 1 X 3.98, 2 X 4.13 1 cell has a detached spot weld (just noticed it) Would it help if I discharged it a few times?

Thanks for the info. I'm learning and the info is great thanks. The BMS would not allow any charge from the 'top' connections, only when I connected to the 'bottom' connectors. Is that not the same as when it's in a charging cradle? (which I don't have)...... I'll check accurately the 10...

Thanks for coming back to me so quickly. I have managed to coax the battery back to life !! ( watched many clips and read many articles) Used car batteries in series to 'force' a semi charge, then found it would only take a charge from the bottom 'cradle' point. I only have a side charger so...

Hello. I've purchased a 2013 Kalkhoff Agattu 36v 17AH from an auction. Battery seems dead but I want to check the rest of the bike out before spending ££££'s on a new battery. Is there anyone in the Lincoln area with a similar machine that I can 'borrow' the battery (I'll come to yours) to...