Recent content by Rabbashanks

Thanks for the reply, Would this then involve soldering? If so, i'd lazily buy the battery and mount with controller if that solved that issue.

Hey, I don't suppose your method would also work on a Haste E Claud Butler would it? I only have an led display so no way to edit parameters...it's 250w, 36v 10ah and limited to 15.5 unfortunately...

Hey guys I recently bought my 2nd ebike, a Claud Butler Haste E. (250w brushless rear hub, 36v 10ah battery, and unfortunate LED display). I've noticed the controller is built into the hailong battery mount. Am i right in thinking if i bought a new hailong battery (say, 36v 16ah) with built in...

Hey guys I recently bought my 2nd ebike, a Claud Butler Haste E. (250w brushless rear hub, 36v 10ah battery, and unfortunate LED display). I've noticed the controller is built into the hailong battery mount. Am i right in thinking if i bought a new hailong battery (say, 36v 16ah) with built in...

Hey guys. Thinking about buying this... The idea of using it off road at 15.5 mph max though kills me... Do the dongle or magnet kits allow this to be derestricted? Obv I understand it will void warrenty etc. Thanks in advance...

Ah i see. Thanks! So basically don't try and pure throttle up a steep or long climb but peddling up should be fine? The majority of my journey is pretty flat except one motorway bridge, which i always peddle up anyway incase the motor claps out from the strain. I do tend to do a mix of peddle...

Thanks again :) I'll stick with what I've got then. I don't know if you remember from my first post on the forum, but we were talking about upping one of my parameters from 12a to 16 or 17a for more hill power...you said it may override P12 (setting off power), which i found out does. I won't...

Hey guys... I have an s830 lcd display and the pdf manual says if i hold the up arrow it will turn on the front light. Am i right in thinkin it can power a usb light via the phone charger port at the bottom of the display? At the mo i just have aaa battery powered twin lights (torch style in...

Sorry to resurrect this post but in regards to 12 and 14 on the menu... I set p12 to 5 (max) and p14 to 17a from 12a like you suggested. Is there any reason i can't take it to 20a (highest menu option i have) or was 17a a max suggestion? Thanks again mate!

Ah i see. Thanks Pete! Looks like I'll be sticking with what i have until xmas or so...god i want that bbshd now lol.

The The bbshd looks amazing! Would still need to buy a battery too but in an ideal world...this is my next one! Wow.

Thanks for all the help guys! So...if i bought this 36v 20a battery (same as my current one but almost double the amps) it should wire up fine with my motor and display as the controller is internal... Giving me more range and torque but probably no more top speed? I'd pay the £325 to replace...

Thanks for the help mate. I should have mentioned i changed the speed settings from mph to kph when altering the wheel size from 26 to 18inch, which supposedly compensates for the inaccurate reading; the now kph reading should be roughly the mph its doing. It does feel a bit nippier... Im...

Am i right thinking the controller is in the motor hub? Or are they not a factor with hub motors? Obviously I've read that my battery option is down to the controller capacity but without knowing the make model or spec of my motor I'm still unsure... Thanks btw, i think you also responded to my...

Hey guys. I'm trying to find out if my 250 watt brushless motor can safely handle more than the 36v11a battery i got with the bike. I can't see the "controller", only the motor, battery and screen display. The screen has a 36v sticker on the underside, but menu options for 24 36 48 and possibly...