Recent content by Rossco

Well I may have found the problem, I reconnected the motor connector by twisting it and effectively changing which pins went into which holes if you know what I mean and the error message disappeared. I hope it will be that easy, thanks for the guidance in any event and until the next time...

Thanks... So just to clarify, I have had the error 08 in the past but not very often, mainly the issue has been the display unit sporadically not turning on. However, now the display unit just is displaying the error code but given past performance I'm expecting the bike to randomly work again...

Just coming back on this thread... The bike shop was unable to find a problem and gave me the bike back. I'm now getting the Error message 8 which the manual says relates to: Fault with motor hall sensor inside - check the motor module. Just to confirm that usually the bike operates perfectly...

Thanks for your help. I spoke to the bike shop about your reply and they are now suggesting that I get a replacement controller... Given that a replacement display unit didn't make a difference then do you think it's wise to take this step?

Hi all, I live in Dublin and I have an Azor Dutch style bike that has a Bafang front-wheel motor - the motor is incorporated in the front hub. The display unit is Bafang DP C11. I've had the bike for a couple of years with no issue but recently the display unit only will switch on...

Thanks again, so i'd prob need to replace the controller then and to do that find someone with experience to do it. Any suggestions on what controller to get?

Thanks for the reply. The link to the throttle is below: https://www.atmparts.eu/p24_eu/eshop/de/2W/BBS-TT So basically the controller needs to have a throttle connection and also the firmware. It seems to be located under the bicycle rack at the back. Is it common for factory shipped bikes to...

Hi all, I have an Azor ebike that has a Bafang FM G311.250.V/D front wheel hub. It also has the basic display below. https://bafang-e.com/en/oem-area/components/component/hmi/dp-c11uart/ I'm wondering how easy it would be to fit a throttle. I bought the throttle in the attached photo. I'm a...

Thanks for your help... I have ordered the Woosh detailed above...

Thank you for your offer. Do folk generally think that this would be a sensible / optimal set up?

Thanks for your help. Looks like I will have to accept losing the front light. Will the current gearing system still work after the kit is fitted? It looks like the Whoosh solution could work with a 13AH battery but what would the total weight then be considering the bike is already heavy. What...

Hello, I'm looking into converting my Cube commuting bike (link below). I think a front wheel hub would work best as the bike has a rear wheel hub and coaster back pedal brake that I would like to keep. I have a concern that the front forks are too close together for the replacement wheel. They...