Recent content by StuG

Thank you Woosh

Great thanks!

Hi guys, I think it is all now sorted . Brakes were fine. It was the brake disc side that was pinching the wheel when the nut was tightened. So I turned the hexagon shape bolt out a little away from the motor. Doing this then made the opposite side pinch the wheel when tightened, so I put...

Right. First off, apologies, first time doing something like this, appreciate both your help. I didn't put the connector back properly after checking the pins. Power now sorted. With the wheel, see pics. Loosened the nuts, throttle now works with the readout to 15mph. If I tighten up too much...

Still no difference

I think it is. Doesn't spin as freely as a standard wheel, but figure the motor adds some resistance. However if I tighten the nuts up that starts to restrict the movement

Unplugged the brake sensors and throttle. Still no read out when pressing for walk when the wheel rotated. When I pressed for a second time, the LCD says "Push" but the wheel is no longer rotating

Hi Woosh, Thanks for instructions. So, walk mode causes the wheel to rotate freely and easily. The led flashes when turning the crank. No speed read out on the LCD though and '25' doesn't appear when trying the breaks. Pressing the throttle sends power to the wheel but it struggles to...

Front hub kit from Woosh

Hi, Today I installed a front hub conversion kit to my hybrid bike. It has a 36v 13ah battery and is fully charged. When I tested it first time earlier, the power was very light to the motor. When the throttle was pressed, power went to the wheel, but not enough to pull me along. Also didn't...