Recent content by Thomas Bremnes

  1. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    ok cool thanks again :)
  2. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    0 Ok, so after mainly even worse results and found the "sweet combo" It seems if i use/used or started the app (bluetooth androind) PAS stoppes working different settings in the app i guess that overrides. But uninstalled it and removed bt antenna on ctrl :) Speed is correct now, really runs...
  3. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Hi thanks for your quick reply's I took it for a spin in the snow displayed speed is about 2x real speed (guess as it's impossible to check with GPS atm) Ok some more info C1 - I use KT-D12L Pas P2 - I'll try changing agree it's a weird number C3 - I'll try new settings C7 - I'll switch it...
  4. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    I got it working atleast inside waiting for real test outside when it stops snowing:) found the info on ratio and the poles from reseller. P1 45 P2 5 P3 1 P4 0 P5 15 C1 06 C2 0 C3 3 C4 0 C5 10 C6 3 C7 1 C8 1 C9 0 C10 n C11 0 C12 4 C13 0 C14 2
  5. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Dusted off and looked at the bike again.... after enjoying the amazing summer (or most of it after being hit by a car,with no more than a multifractured foot and a cracked helmet after it probably saved my life) on my other Bosch powered hardtail im now in a different situation with a very sick...
  6. Thomas Bremnes

    Little late but better than never ..... Another newbie (danish)

    Hi, Quick intro, 38 yr old computer engineer/architect. Newer was much for e-bikes but about a 2 years ago stumbled on an small folding bike that my friends brought with them from the U.S. (Green world bike) non working at all but in brand new shape. Got me curious atleast electrical wise...
  7. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Awesome :) Mine used to as well using that same manual works now as well just the display that is weird. Your link btw sent me to the UK law page. Checked my country laws to see if it's required by law to have a display but not what I can find. Looked at the site and controller you suggeated...
  8. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Update..... Tried the bike today -5 C and snow. Conclusion : The 12 magnets sure makes a difference vs 5 but its still messed up. Working: PAS Levels (with 3 kind of normal on all 3) (with 5, level 5 makes it a scooter with cruise controll speed limited by amps only speed limiter dont work)...
  9. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    And liftoff ...... literally forgot how powerful that motor is LOL ... And found the correct manual with the EU settings specified. http://www.shinga.nl/wp-content/uploads/2016/02/Manual-LCD-display-May-2015-V3.4.2-EN.pdf These standard settings apply for Europe with the exception of the U.K...
  10. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Hi. Thx, the only wires changed are to the new PAS, only tried it relying on the led only lights up when its turning the right way but will try and take it off again and try all 4 ways to be sure. there are arrows on the disc but none on the reader so assumed when it was spinning right the led...
  11. Thomas Bremnes

    Help my LCD lost its settings P1-P16

    Help, I finally got a 12 magnet PAS to replace my old cracked 5 magnet one. Wired the bike back up turned it on display looked normal. But the only things that work are throttle, walk assist, power assist up/down and brake cutoffs No speed odo is fixed at 360km when i look in parameters up and...
  12. Thomas Bremnes

    Help identifying my controller and geared rear hub motor from greenworld bikes

    Thanks alot i really love the bike in the city, and would like to keep it the same :)
  13. Thomas Bremnes

    Help identifying my controller and geared rear hub motor from greenworld bikes

    Hi, sorry should have thought of that. no the motor is 3x1 + 6pin HAL The writing says XF08 Anyway to find out how many Amps the controller will take? or perhaps easier to just buy a new one? Sorry for the bad pics :(
  14. Thomas Bremnes

    Help identifying my controller and geared rear hub motor from greenworld bikes

    Hiya all, Now i looked on 1000's of pages to find out what controller and motori have in my e-trollley. IT's a greenworld bike pro version with 16" wheels. All i could find out also emailed some companies in the us that are supposed to have som in stock. I found some info on the controller but...