Can any of the experts out there comment on the likely thread size of my Bafang hub motor please?
I bought it used without any nuts, so need to source some.
The motor has BFSWXB24V250W255R marked on it and has a 12mm O/D shaft with flats on it which bring it down to 10mm, it looks like a fine pitch thread.
I found this drawing online, which has M12 x 1.25 stated but then some of the other dimensions don't seem to tie up with my motor, so I have some doubts as to whether I should believe it!
http://www.e-bikeconversionkit.com/images/MOTOR/SWXB.pdf
Is M12 x 1.25 likely to be the right answer?
Thanks in advance for any advice offered.
Excellent forum this!
I bought it used without any nuts, so need to source some.
The motor has BFSWXB24V250W255R marked on it and has a 12mm O/D shaft with flats on it which bring it down to 10mm, it looks like a fine pitch thread.
I found this drawing online, which has M12 x 1.25 stated but then some of the other dimensions don't seem to tie up with my motor, so I have some doubts as to whether I should believe it!
http://www.e-bikeconversionkit.com/images/MOTOR/SWXB.pdf
Is M12 x 1.25 likely to be the right answer?
Thanks in advance for any advice offered.
Excellent forum this!