Search results

  1. A

    Cutting Edge Design ;o)

    Hit with the ugly stick twice
  2. A

    Has anyone tried the Ezee V2 motor with 48v?

    Mine works fine no problems yet
  3. A

    cyclone mid mod

    Still messing best combo so far,1680 mid. Gearbox bearings replaced , oil filled, one way bear 7 tooth sprocket on output, cadence now at about 80, pedal assist now works, + torque increase motor spins in a happy zone. Plenty of power. About 50% less noise than stock, but not as quiet as a hub...
  4. A

    Electric Bike Ban

    At many speeds ebike use less energy than a humanpowered cycle riding the same route . It makes a total shambles of any green house , green peace, green green , greener planet thing that bunny huggers have been bashing on about . What a load of Jackson Pollocks . The world is way too full of...
  5. A

    My first ride :)

    :) its like when I first swang a golf stick and the old bloke walked past and said ' its to late son, you should have left when you could have'.
  6. A

    My first ride :)

    The bug has bitten, there's no turning back
  7. A

    Very lightweight e-bikes

    Old carbon frames are quite different, to the stuff produce in the last few years. You need to pay attention to the weight limits on frames and carbon wheels. If you only have 100kg limit you need to be light yourself and then the stuff you add on must be light. Carbon is a directional material...
  8. A

    Ebike - long range

    The new cells are coming, metabo is offering 6ah 18v packs for there tools either 3 or 5 year warranty on there battery, I guess there using the new 3ah metal cells current draw is very high in this application. The future is looking brighter. I am have good success with lipo 2* 6 cell packs...
  9. A

    Nuvinci N360 New for £132!

    I am really keen to see how you find it, I am considering buying the 750w version and putting it on a bike, my hub took a while to break in , the other thing from your numbers will be the compared kWh usage over your route,
  10. A

    Nuvinci N360 New for £132!

    Hi, I would start at 18 what I did when selecting ranges is buy a 7-10 speed rear gear and break it up , just need to file 1 flat if I remember, then you can swop gears to your hearts content. Also it has a wider gear range than a 10 speed rear, so you can to lower or higher, that's what I was...
  11. A

    7s booster

    Hi , I found the wiring on controllers can be substandard and mine shorted inside, not as good as rc stuff anyway a fuse would have stopped my battery welding machine from becoming operational on the road side.
  12. A

    7s booster

    I would put a fuse as close to the pack as you can , things go bad fast with these batterys , Bought that lesson
  13. A

    Ezee Sprint compared to Tonaro Esprit 2

    Yes weight to power ratio is really where its at, Unsprung mass off road is the killer, On road much less of a problem, Will let you know how the ezee monkey goes, I have great hopes in this, I really hope it works,
  14. A

    Ezee Sprint compared to Tonaro Esprit 2

    I also have a tonaro, I put an old crystlte 48v 35 amp controller on it with throttle, its my bench mark. 1 motor gets hot when used hard for 10kms. 2 whole bike heavy even after upgrades. 3 crank drive on this sucks power just to turn itself, an Asthmatic ant hill is more efficient and sounds...
  15. A

    Ezee Sprint compared to Tonaro Esprit 2

    Specialized carbon frame mounted in above the crank, very much in board motor, Reason weight and power, think like the nano unit that sells over there. Am just making the brackets up now , the rest is done. I did a test run with a mock up bracket, gearing 11t to 36 on crank. It pulled the...
  16. A

    Ezee Sprint compared to Tonaro Esprit 2

    hi,m I am doing a stoke monkey conversion with the ezee motor, will let you no how it compares.
  17. A

    Nuvinci N360 New for £132!

    Hi, 32spoke fairly good mtb rim , the spokes have taken some strain, but its ok so far
  18. A

    Nuvinci N360 New for £132!

    Hi, I have been running a 360 second gen model for a while on a project bike max output 6kw , I have limited the nm output from the motor to below 130nm at the rear wheel sprocket input, so far all is well. Bike and my weight 110kg. Will not shift up under full load, as mentioned earlier in the...
  19. A

    ezee canon

    Re throttle , its all normal its just that the position is so rotated about 45deg ,instead of below the brake lever to above it. Maybe you cant see the marks any more, but I never look at them anyway . Point turn go,(seems to work) What is the normal complete rear wheel weight? Can U weight it...
  20. A

    ezee canon

    Too many years using right throttle , to think of going left side. I am looking at small light weight indicators for the bike to take care of that problem, things happen very fast at 15,1 mph