Search results

I have Nyon on one of my bikes and a Kiox on the other. Prefer the Nyon with its larger display. Sync to Strava is possible but has to be done manually from the online ebike connect portal. The Kiox requires a blue tooth connection with a phone if you want the full ride data to be available...

I had this problem once , contacted Bosch via facebook and was given this reply "if you can not activate the WLAN at the Nyon after the update, please get in touch with your local dealer. He should use a Bosch diagnostic software to perform a so-called flash update with your nyon" My dealer...

To replace the non-drive end bearing as suggested will require a virtually complete strip down of the motor. One of the main difficulties is removing the torque sensor, which has an unusual securing nut, this would probably need a special tool. [OK you could use a chisel but would have...

A 3 year old Haibike AllMtn Pro with about 19000km on the clock was giving occasional battery problems. [error code 530 and occasionally loosing power] One on the problems appears to have been the state of the frame battery connection terminals. The +ve terminal appears to have lost its...

More or less, but only 4 modes are active at one time. Either the default modes or the custom modes. It is not possible to go from say eco to custom 1 and then on to tour. You step through the 4 default modes or the 4 custom modes. Making the custom or default modes active only takes a few...

Just to clarify the custom mode function, it is possible to change the profile of the power delivery as shown below. There are 4 adjustable points on each custom mode, which can be moved in the power and speed axis to give the profile that suits your riding style / conditions. The original 4...

Just to clear up any doubt, below is a photo of my old bearing with the new bearing packaging. [unfortunately did not take any photos of the motor strip down / rebuild] I was a little surprised to see that the replacement bearing was a MAX type, I have always thought that this type of...

I got the bearing from e-bikeshop , though they will only sell you a bearing if you actually bought the bike from them. As mentioned earlier in the thread also get the plastic auxiliary seal. Further to my previous message, as the bearing is still in the housing don't pull the drive shaft out...

I replaced the bearing on my motor about 6 months ago so may be able to help. It is very difficult to tell from the photo you posted, but did the bearing come away with the outer casing or is it still attached to the drive shaft as in the photo below I actually removed the motor from the...

There is a known problem with the main drive bearing on the Gen 2 motors, it though should not have failed after such a low mileage [mine started to get noisy after ~ 4000km] Bosch now use an upgraded bearing [MAX type i.e. it has the maximum number of ball bearings in the race for higher...

I have checked the Nyon mileage figures against a GPS . Both now more or less in agreement after I tweaked the wheel circumference setting on the settings page.

If the intuvia is so great why have you also fitted a Halfords cycle computer on your bars ?

Mine was replaced under warranty, you should get on to your dealer about it.

That's strange my Nyon keeps track of the total milage on the Dashboard screen [I reset the trip data before every ride] The total mileage is also shown on the online portal if you bother to upload the data. Bosch still don't allow the ride data to be downloaded in GPX format so no use if you...

I have one of these works a treat opening and closing the quick links. Too big though to be carrying around with you though.

Nice to hear that you managed to get it all working in the end though don't pretend to understand how. Also a bit confused with the photos, one shows a bike with Avid brakes and the other with Shimano brakes. Obviously missed part of the discussion somewhere, not that it really matters as the...

Do you see the charge signal when you have the Nyon USB cable connected ? If not the USB connection point may be damaged - there a few reports of this being damaged by people trying to force the connector in the wrong way round. I wonder if the update would be possible with the Nyon fitted on...

Sorry about the rude reply, should have counted to 10 before hitting the send button. Most people will agree that the Nyon system has been a bit of a disappointment, we are just hopping that Bosch can make it a bit more useful. We are fully aware that you are a Nyon hater from your numerous...

The altitude can be set on the Settings page, on reflection though the actual attitude should not affect the ascent calculation. Just checked my last ride data and the figure from the Nyon was not that far out [Nyon 800m, Strava 840m]

No I think they are ordering parts for their brakes which will never fit, how's that going. haha lol