Search results

  1. A

    Battery box/bag needed

    I have an aluminium battery box for sale which can take up to 6 or is it 8? (can't remember without checking) x turnigy 5000mah 6s. So it can take either 15Amp hrs or 20 @ 52 volts; will have to check. The controller can mount on lid .... it is designed for a full suspension bike.
  2. A

    *Wanted* Bafang BBS Central Motor Speed Sensor Extension lead

    Glad you like it; works for me. Don't forget to follow the wire core colours through to the correct contacts - you may need to make yourself a diag. note as, when you have done one end, you may lose sight of the colours under the small shrink tubing. It can all easily pull apart until you have...
  3. A

    26 tyres for Ebikes

    Maxxis 2.35 Ardents. Very high volume, larger than the size suggests, and easy rolling. My favourite tyre on my standard mtb.
  4. A

    Extending a Bafang speed sensor cable

    Just make your own, as I did for our tandem. Length of three core round black flex to match ... Connect each core using a little piece of stiff narrow wire; l cut the legs off an led diode but you could cut the wires of a resistor or similar ..... Just poke this up the insulation and into...
  5. A

    WANTED - a 250w BBS01 (eventually)

    Simple answer to the amp problem ... Just connect to a computer with a serial connector and lower the amps from 25 to 18. Also you will never burn out the controller.
  6. A

    *Wanted* Bafang BBS Central Motor Speed Sensor Extension lead

    Just make your own, as I did for our tandem. Length of three core round black flex to match ... Connect each core using a little piece of stiff narrow wire; l cut the legs off an led diode but you could cut the wires of a resistor or similar ..... Just poke this up the insulation and into...