Search results

It is working now!!! Thanks so much!!!!! Now I have to do some fixings as it is not working the derailleur... take care Belén

If anyone would know which size is the bottom bracket would be helpful to buy it without dissembling Getting there I am glad that is working backwards. Now I have to find out if would work flipping the magnetic disk You guys are fantastic Thanks so much Belén

Thanks vfr400 It is working backwards So I need to check if flipping the magnetic disk would work Sorry for not replying I have been too busy. I am trying to sort it out these days I have to change the bottom bracket because it is worn out

Hi there, I would need some advice again. I had to change the inner part of the crank spindle as it was very loose and didn’t work From this moment the pedal assist doesn’t work. Everything seems connected inside. Anyone knows what could be happening? Thanks very much Belén

Hi there, My pro rider e-tourer has a bad noise coming from the break on the rear while and stops abruptly when using it. It is annoying and scary as it is not working properly. Anyone knows how to sort it out please? Thanks guys for your wonderful help Belén

Ok, thanks I will be checking wires and the throttle as you told me and will say something. Thanks everyone for the advice. Belén

Hi VFR, So I am going to open the throttle tomorrow. I am not sure how to do it as I can only see how to take it out, but now what I need to open to look for the magnet. I am buying the speedometer. Would be ok this one below? that one that you recommended would arrive in January...

Yes, it has a run on after pedalling, but intermitent, so start and stop different times abruptly and strongly. And after using the rear wheel brake when I release it, starts speeding abruptly for a while. So if I am at the traffic lights and release the brake becomes a problem. Scary.

Thanks, so much! Could you let me kow the exact name part for the speed sensor please? I would lime to buy it in ebay. Thanks! I am amazed about al your knoledge. Belén

Hi there, The bike is working but no really well. It slows down suddenly when pedaling for no reason and in these moments I only can give speed using the throttle. More scary has been when after using the wheel brake, and realising it, without pedaling , the bike speeded up abruptly. This...

The bike has been working! Thanks very much VFR, I am going to see if it works properly these days. The only thing that I have noticed, it is that it is not very powerful, less than before. I do not know if this is related to the white cable coming from the brushless motor, as I have not another...

The only thing that still I do not know if it is ok, is that when I switch on the lcd pannel and use the right gear, it shows an exclamation symbol. Is it ok?

The sparkling came from the red battery connector. I changed it Switched on. Lcd pannel Works again! Learning mode working now with the wheel working! I changed one of the connector for the brake as it was not coming inside. Switched on and the km in the lcd pannel was showing an error. A...

This is a video withe sound coming from the wheel motor when on learning mode And this was the sound coming from the battery with all the cables switched on

I had to rconnect the brakes connections as they were loose. After that I switched on and listened a sound like spark and now the lcd pannel is not working

brakes

Pedal sensor

Throtlle

Hall. I realised that the wires did not match and I just changed, but still the same problem. There is a white wire coming from the controller and from the motor this cables is missing. 1st pic are the wires comimg from the wheel motor 2nd pic are wires coming from the controller 3r pic all...

Battery connectors