Search results

Good morning mate I gave it a good charge and it got me work without a problem.. charged it back up at work and it brought me home. So everything seams ok. Thank you but if it happens again for some unknown reason I will post here. Thanks again for all your help

I'll give it a charge and see if it will get me to work in the morning. Thank you for all your help.

Yes mate I'm getting 54.6v from the charger

No problem and the q&a helps me as well as anyone else with the same or similar problem. Yes 50.7v from the output pins.

Just tested and yes I'm getting 50.7v

Yes mate just tested and b- & b13 = 50.7v

I have a pedalease x-cross x8c with 1000w rear hub and 880 led controller with twist grip accelerator and pas system, was brought as complete bike from pedalease.

Yes sorry just checked them all again all are reading 3.9v

Here are the readings...

Connector

Just tested the main out put and it's at 32.2v and that's at 3/4 charge. Will test it again when fully charged ( having to disonnet the bms to charge it as won't charge properly)

Just checked the voltage on each terminal (13s) and have 28. Volts per terminal.

Hi and thanks for the reply..the battery is just over a year old. As for voltage when charged unsure at the moment as haven't tested it. But when it works it still gives me the same range as when I first got it.

Hi guy's and girls. I not sure if I have posted this in the right place. I have a problem with my battery, when out on my bike the power will cut out completely so I try turning the battery off then back on, sometimes it will come back on then cut out again a few yards further down the road...