Hi all, after a week of trying to find a replacement display for my Pendleton Somerby and reading many of posts like this, I found that Halfords have discontinued the 790 display for the Pendleton........BUT, if you look on their website at part number 196086 it is exactly the same (with walk...
I've now managed to sort it I think, left the BMS unplugged overnight and tried it this morning, all seems to be Ok now, have tried it around 20 times with no issues, Thanks for your help vfr400 & Nealh.
Thanks for the reply guy's, the switch solder is fine, VFR400, it's the combination of turning the bike off by the battery switch that causes the issue, if I turn it off by the control panel then it seems fine and works as it should, if left then when I turn it on the panel flashes once and then...
Just tested the cell groups as follows
1, 4.13
2, 4.13
3, 4.13
4, 4.13
5, 4.13
6, 4.13
7, 4.13
8, 4.13
9, 4.13
10, 4.14
The cells seem to be ok, the battery charged as I would expect but the on/off issue is baffling me.
I've tested voltage on the battery at 41.7v, when the display works it all seems fine on pedal assist, the BMS has on/off on it which is my first thought, do you think I have a mix of over/undercharged cell groups which is causing the issue ?
Hi All, I bought a 2018 crosscity e bike with a dead battery, it had fallen below minimum voltage to charge, I opened up the battery and charged it by the battery + & -, now when I turn it on it either turns on straight away or the display just flashes and then turns off, if you turn it off via...
I'm after the rear hanger torque sensor for a giant twist, part number is 245MZWGITS-09V, not sure if the 07V would work.
Or any information as to set these up would be great.
Many thanks
Clive