Search results

Thanks again for the responses. Have changed the C1 settings to 07 and all the intermittent issues seem to have disappeared. Its probably the correct setting for the KT-V12L from what i read but ill give it a few more rides and see. I also preset C3 to level 5 and its a bit wild for town...

Thanks for your response guys. In terms of the assist levels, I thought that the S06s "torque simulation" would function close to a real torque sensor so I just leave it set at 5 - I have a tdsz2 and I just leave it at one setting and my legs decide how quick I want to ride. From what I've...

I would like to run the S06S controller without the LCD3 display. Do the parameters ,(P1,P,C1 etc), you set get saved to the controller so can be run without or is it reliant on the LCD3 being plugged in?

If you get the optional 52t chaining that some sellers provide it with (some sell it with 42t only and others with a selection of chain rings), you can achieve roughly the same as my setup. on a 26" wheel = 52/17 = approximately 80 gear inches on a 700c wheel - 52/17 = approximately 83 gear inches

I have an automatix freewheel which I plan to put on to my tsdz2 setup. I use it on a daily bike at the moment and Ive done the mod to have the second gear switch over at 15-16mph. I am also torn between just putting a 58t chainring on. It is a regular automatix so the main issue for me is...

I just completed my single speed TSDZ2 on a 20". I am currently running 53/13 which is roughly 82-83 gear inches. This gives me about 22mph topped out - PAS only. Main issues you have to worry about is chain alignment if doing single speed - the tsdz2 sticks out a lot to the right. Other than...