Search results

  1. M

    Vengeance battery not charging

    Send the battery to a verified receller on here and let them fix it for you. Saves you trying to wire 4 X 12V batteries together and using them to re-invigirate your battery.
  2. M

    Fake ebike battery cells.

    What I was saying is Samsung et Al record how many times the QR code has been submitted to Samsung and if over a threshold, the battery could be fake. Each QR code has a unique code, Samsung checks how many time this code has been submitted, over a certain threshold, Samsung flags it as a...
  3. M

    Ecotric controller

    Or I suppose could be one of the hall effect wires. You need to search for wiring information. There was a post earlier today about learning wires. If not on here, then on Facebook e-bikes UK
  4. M

    Ecotric controller

    Sounds like the learning wires. Look here or pedelecs website for more info.
  5. M

    Fake ebike battery cells.

    Should be a QR code on each cell that can only be produced by Samsung and the like. We scan the QR code and the Samsung website tells us if it is real or not. Feck, I had a think about this. This won't work. What about a counter of how many times the QR code has been submitted to Samsung? Any...
  6. M

    Carerra torque spring removal?

    And it works great. Pity there was no actual setting to set in the display to do this. Thanks again, very much.
  7. M

    Carerra torque spring removal?

    I bit the bullet. Not only are the shims important, the bits have to fit back together in a certain way, little nipples having to fit into certain holes, and then the crank fits back into the assembly in a certain way, which I got wrong the first time trying to screw it all back together. And...
  8. M

    Carerra torque spring removal?

    Before I actually bite the bullet and try to force a spring out, can I buy a complete sprocket assembly off the shelf in case I break any of the tines for cadence / torque? Thanks.
  9. M

    Carerra torque spring removal?

    Do i lever it out between what looks to be an end plate on the spring and the metal surround, or is that metal end plate part of that surround, and more importantly can the spring be put back in again? Thanks again.
  10. M

    Carerra torque spring removal?

    I did see that post and do reference it above in my question. Your photos seem to show Allen bolts right beside the springs, but in my cog, it seems to be different, so I am wondering how am I going to remove one or two of these. Thanks.
  11. M

    How to add a throttle to a Carrera Vengeance E Spec

    Why not just buy new grips and cut the old ones off?
  12. M

    Carerra torque spring removal?

    Would you have any photos? Thank you.
  13. M

    Carerra torque spring removal?

    Thanks for finding that for me. I had even replied to that last year. Stoopid me not looking at my own posts.
  14. M

    Delimit Carrera Crossfire E

    Hi, I need to know how you removed the springs in the carerra torque sprocket. Thanks.
  15. M

    Batteries, where to get someone to refurb/sell?

    Battery badly worn out on my Falcon ebike, and I need to know a good refurber/seller. Thank you.
  16. M

    Carerra torque spring removal?

    Hi, Back to my Carerra cos my battery badly worn out on other e-bike. I could swear I spotted a post where someone took two of the torque springs out of the main Cog, to reduce the amount of torque needed on the pedals, but I cannot find the post. It is not this one...
  17. M

    Suntour/Carrera Torque Sensor Problem

    Which way to loosen the cog side Allen bolt that screws the pedal arm into the crank axle? Thanks.
  18. M

    Delimit Carrera Crossfire E

    Just got a notification, and I was thinking if doing this, so superb that it can be done and the flag moves more/further easier. I will be doing the same to mine ASAP. Thank you.
  19. M

    Carrera charge cable extender

    Ok guys, In case anyone is looking for this in the future. Can buy these open ended at one end also in case you break the charging lead and know someone that can solder these to the original charging lead. Here's what I bought from RS components. UK.rs-online.com A 50cm extension lead for the...