Search results

  1. M

    Problem with my Bafang HD

    That sticky out bit in the blue wire doesn't look good (also slightly burnt/ short) definitely could be your issue and looks factory, the others yes does look like may have been caused taking apart.
  2. M

    Wanted Bafang m620 and frame

    Motor or frame let me know what you've got. Suffolk. Thank you..
  3. M

    Its gets worse

    Shame, beginning of the end!!.. thanks. Muppets
  4. M

    Help! KT LCD3 eBike display "info 03" error

    The motor didn't die I found out it fell over in the bike sheds at work a colleague picked it up for me, ride home was peddle job the motor is great! Except you can't get into it!!..which I will look out for in the future as would be nice to have the option to replace the gears and clutch! But...
  5. M

    Help! KT LCD3 eBike display "info 03" error

    Pic from YouTube.. they guy made a special tool but still managed to ruin his motor rendering it useless.. so didn't go for it
  6. M

    Help! KT LCD3 eBike display "info 03" error

    I would replace the cable if the motor had screws holding it together but unfortunately the mxus hub motor has a 3 plug special tool (or make one) to split the motor in two, what a pain in the A job that I don't fancy lol..
  7. M

    Help! KT LCD3 eBike display "info 03" error

    All up and running (massive smile) thank you all.. Soldered the wires and all good, had to change c1 value to C1=3 for 12 magnet left hand side crank to get the updated 12 magnet Pas to work. Excellent thanks again members and hope this helps folks out in the future..
  8. M

    Help! KT LCD3 eBike display "info 03" error

    Found the problem (smile)
  9. M

    Help! KT LCD3 eBike display "info 03" error

    We have a update, a friend of mine let me plug my set up into his wheel and it works perfectly not the same motor but I'm now thinking my motor is gone!.. must be?. It's a mxus any ideas how to get into it? If at all possible?.. Also I'm not getting good feeling about this so may aswell as if...
  10. M

    Help! KT LCD3 eBike display "info 03" error

    Thank you Nealh I'd just about give up I'm getting nothing swooping wires about so to be given another avenue is great, thank you. I'm going to start again but work on getting Pas to work. Fortunately I ordered 2 throttles (half, and thumb) and 2 Pas (8 and 12) they both only plug into on...
  11. M

    Help! KT LCD3 eBike display "info 03" error

    I've tried a few yellow green combinations hall and phase and absolutely nothing!. I thought I'd of got something by now?... All info 03!. I'm lost
  12. M

    Help! KT LCD3 eBike display "info 03" error

    Vfr tried green to yellow and yellow to green on the phase = same nothing? 03 info Then tried c2 01 and same nothing? 03 info. Tried resetting the display to factory incase I accidentally moved some values. And same results no noise no movement at all, just info 03.. Pas doesn't seem to...
  13. M

    Help! KT LCD3 eBike display "info 03" error

    Throttle = info 03 Pas = nothing Walk button = info 03
  14. M

    Help! KT LCD3 eBike display "info 03" error

    Nice one vfr I'll be giving it a go once I finish work tonight and will report back, cheers dude much appreciated
  15. M

    Help! KT LCD3 eBike display "info 03" error

    Hi members need a little technical help if at all possible. My apologies for posting as I have tried to search this issue.. I have a new display module kit KT LCD3 36V complete kit so basically just had a battery and motor on the bike to connect this kit too.. The motor has a fancy all in one...
  16. M

    Help! Best option for New controller and LCD display!.

    That's great thank you vfr400. Yes your right I don't think my battery or BMS will push that. Do you have a link I could check out?.. thanks again, great advice
  17. M

    Help! Best option for New controller and LCD display!.

    Having a quick look think I'm going to go for something like this, what are your thoughts?.. Thanks https://www.ebay.co.uk/itm/36V15A-48V22A-KT-Controller-250W-500W-Accessories-Kit-Waterproof-/224346430250?_trksid=p2349624.m46890.l49286
  18. M

    Help! Best option for New controller and LCD display!.

    My 36v standard cheap generic ebike has a controller or display fault?.. diagnosis is an issue, so I'd rather just start again. So I'm planning on a new controller and LCD, I'm keeping the 36v battery and 250w rear bafang motor and throttle and pas. What are my best options? eBay if full of...
  19. M

    For Sale Clear out - all sorts of stuff

    I believe I need 36v
  20. M

    For Sale Clear out - all sorts of stuff

    Do you have one of these, or anyone else who could help?.. many thanks in advance.