Search results

Hi All Ivw not touched an iron for years, I used to do a lot of very small PCB work with a pencil iron and some work with a standard iron for bike stuff, it struggled with the Blue EC5 connections, Iknow see most people are using XT60 or XT90 for bigger cables. Is there a reasonably priced...

My bike i'm repairing is a build from here where i had a lot of help, all gear was from BMS Battery Site, it's 36v/500w, ive managed to find out what spoke i need, 12g/190mm so i have ordered them, i might need a new thread on how to align/true the wheel, it's been used on road/off road since...

That’s what I want to build, an electric bike I can pedal off-road.

So there’s not much support for off-road bikes then. I think I will start another thread as I have ditched this idea. I’ve actually had my very first build I done on here with Haley from DaveHand Nial/Neil. ( unsure if the usernames tbh) its come back to me in a very poor state with broken...

What happened to this site!! It's now DEAD!!! :(:(

Little update. Been googling LCDs and came across this pre wired loom (looks like the Cyclotricity. Anyone else used this? Can I get every other part to fit it like the controller. Break sensor. Throttle etc? Im presuming the ‘WP’ I have seen after listed items means they are the colour...

Hi All No done a build for years (i think 10 years ago with a rear geared Bafang motor) and i'm amazed how much things have progressed and the kit now available! I have a Carrera Kraken 27.5" latest model/Hydraulic brakes and i'm looking to for rear wheel conversion with a 1500w...

Hi guys, just came across this whilst googling and my friend has purchased one and is looking to derestrict it. Is there any update? Here is the exact model from Halfrauds with the Suntour system...

Well i finally have a new controller!! £88 later!! I have also 'managed' to sign/date consent form for derestriction, i sent it to the required address one week ago. Apparently they have not received it!! Starting to lose hope in Cyclotricity tbh!!! Very poor comms... I 'think' i may be...

Well it seems like they do not bother to reply back via email/contact us? I need to know 100% that i can enable 1000w mode. My brother (who i had bike off) stated he had to sign a disclaimer and he had to set up P6 function (enter any number except 99) himself, but has lost the instructions.

Any Cyclotricity boys on here then?

So what signal is it sending to the KT controller? Surely there must be a way to 'frig' it to get it up to max/1000w... Where's the Electronics Engs mun. Endless Sphere will know...lol

But the first one is the LCD1 model ??

It's over 5 years old, pretty sure there is one cable going to te motor and that is 3 pin...lol Just came across these-...

Oh, i missed the 3 from my above post, it's 3 pin at the last connection nea the motor hub.

What's the problem with d8veh ? He was a great help to me years ago, inbox me...lol Cheers guys.

Well it's going but it aint 1000w!! It's slow as hell...ol The motor has connections only (i presumed all brushless motors were 3 phase?) Pics below of KT controller. Cheers

D8veh helped me a LOT with my first bike i made, i still have the Hobbying batteries, balancing charger, harnesses to charge all 6 at once..NEVER been used..Think i need a sort out ans sell some gear tbh.. Going to get bike out now and have a look at controller, short red to blue and the yellow...

How do you have so much info on this

Yea, i think the PAS was 1 at all times, i only used throttle. Is there a diagram for the controller/LCD. Strange how the LCD's listed here are 6 inputs and mine is 5 to the PCB, is the extra for a hard wired signal to derestrict? How is it measuring the two inputs on the Blue/Yellow by...