BadassBox 3.4 for Brose

[chainy]

Hi guys I need some advice on this box as looking to purchase one for my Brose motor from this company

https://www.ebiketuning.com/badassebikes-box-3-3-for-brose.html

I see there is an option for spacers or adapter plates as they call it 5 and 10mm. What are they for and how can I tell if I even need an adapter plate at all. The bike in question is a Scott E Aspect 920..
Thanks

IF anyone could recommend a delimiter for a Brose motor that does not affect the display mph reading that would be even better otherwise I will stick with the Box

 

[soundwave]

https://www.ebiketuning.com/shop/brose.html

given those options and less hassle id go with the bad ass

 

[chainy]

https://www.ebiketuning.com/shop/brose.html

given those options and less hassle id go with the bad ass

Hi soundwave it is the bad ass box that I have linked. There is an option list on the website that offers 5 or 10mm adapters but I am unsure what size to order or maybe I dont need an adaptor at all...

 

[soundwave]

it is a mtb so i doubt you need one you only need them for like town bikes where the dongle would hit the spokes.

id also order direct from bad ass
https://www.badassebikes.com/en/badass-box-ebike-tuning/brose/badassbox-typ3-4-brose/a-117/

 

[chainy]

it is a mtb so i doubt you need one you only need them for like town bikes where the dongle would hit the spokes.

id also order direct from bad ass
https://www.badassebikes.com/en/badass-box-ebike-tuning/brose/badassbox-typ3-4-brose/a-117/

Thx for the direct link I will order direct. Reading up a bit more on the site it says there should be at least 15mm of clearance from the sensor and spokes. They also sell the adaptor and give more info about it.

https://www.badassebikes.com/en/accessories-replacementparts/adapter-plate-5mm/a-108/

Will order just the box and will see if there is enough clearance...
Thx

 

[soundwave]

the adaptors move the dongle down 5-10mm or the uni one lets you move it left and right to miss the spokes should fit no problem

 

[bilabonic]

Just stumbled acros this and looking to get one for my Khalkhoff Endeavour S10....Is this the one i need ??

https://www.badassebikes.com/en/badass-box-ebike-tuning/kalkhoff/badassbox-typ3-4-kalkhoff-impulse-and-evo/a-118/

Cheers

 

[soundwave]

Just stumbled acros this and looking to get one for my Khalkhoff Endeavour S10....Is this the one i need ??

https://www.badassebikes.com/en/badass-box-ebike-tuning/kalkhoff/badassbox-typ3-4-kalkhoff-impulse-and-evo/a-118/

Cheers

yes

 

[Nealh]

Just stumbled acros this and looking to get one for my Khalkhoff Endeavour S10....Is this the one i need ??

https://www.badassebikes.com/en/badass-box-ebike-tuning/kalkhoff/badassbox-typ3-4-kalkhoff-impulse-and-evo/a-118/

Cheers

A dongle for a speed pedelec, you after warp drive .

 

[soundwave]

A dongle for a speed pedelec, you after warp drive .

dongle cut off is 35-36mph so extra 7-8 mph