BPM controller

[dbar]

This is probably a repeat question, but as there are new parts coming out all the time I thought I'd ask anyway.
I have a BPM motor in a 26 inch wheel. It is unsensored. It is etched BPM 36v 350w 26 (11). I have a nice bike to mount this in but no controller, display, throttle ,peddle sensor or brake cutouts. I'm looking for a top speed in the low 20s but mainly I'm looking for good hill climbing for light bridleway use. I currently weigh about 12 stone. Basicly I'm looking for hopfully a plug and play solution with either 36v or 48v which ever will give the best results.

 

[Deleted member 4366]

Code 11 is about 22 mph on the road at 36v. At 48v it will go 33% faster.
The best controller would be the S09P from BMSBattery. It's 22 amps and works with 36v or 48v. 48v gives 33% more power and torque as well.

You need an LCD (s-LCD3) and a wheel-speed sensor to go with it. It's probably worth getting a throttle and PAS too.

 

[dbar]

Thanks for that.