Hi all, great forum you have here! 
I just got a Cube SUV 45 SL 500 29" with a Nyon display and I've done about ~10 rides already. I just love the bike, but I can't say the same about Nyon: it seems there is a synchronization problem with the portal or with the GPS logging, as the following is happening:
Assume a 10km trip from A to B; I have synchronized all rides but 2 out of 10 seem problematic on the ebike-connect.com portal, i.e. I can see my routes shown in a solid dark blue line, but not the entire full trip is shown like that: somewhere at the 6th km the line becomes dashed and "jumps" to the 8th km in a fully straight line, as if the GPS signal was lost on the 6th km and then recovered at the 8th km. The line is then solid again from km 8 to 10.
Screenshot attached, one picture, a thousand words!
The route that I do has clear skies all the way and no tall buildings. I think that it's not loss of GPS signal, simply because I use GPS navigation all the way and I didn't notice any loss of signal or confusion about where I was.
Another very strange thing is that the total distance shown for the ride is the right one, despite the "teleportation"! I tried to figure out how it's done and it's very interesting that it works like this: after the 8th km where the solid line starts again, and for the next 1 REAL km, the portal reports that that distance is 3.6km!! I call this effect the compression and decompression of distance and I'm sure that Bosch has a very reasonable explanation or fix for all this, because paying 500+ Euros for Nyon working like that is not acceptable to my understanding.
Any ideas please? Needless to say, I do have the latest Nyon software as of today.
Thank you all in advance,
Thanasis
I just got a Cube SUV 45 SL 500 29" with a Nyon display and I've done about ~10 rides already. I just love the bike, but I can't say the same about Nyon: it seems there is a synchronization problem with the portal or with the GPS logging, as the following is happening:
Assume a 10km trip from A to B; I have synchronized all rides but 2 out of 10 seem problematic on the ebike-connect.com portal, i.e. I can see my routes shown in a solid dark blue line, but not the entire full trip is shown like that: somewhere at the 6th km the line becomes dashed and "jumps" to the 8th km in a fully straight line, as if the GPS signal was lost on the 6th km and then recovered at the 8th km. The line is then solid again from km 8 to 10.
Screenshot attached, one picture, a thousand words!

The route that I do has clear skies all the way and no tall buildings. I think that it's not loss of GPS signal, simply because I use GPS navigation all the way and I didn't notice any loss of signal or confusion about where I was.
Another very strange thing is that the total distance shown for the ride is the right one, despite the "teleportation"! I tried to figure out how it's done and it's very interesting that it works like this: after the 8th km where the solid line starts again, and for the next 1 REAL km, the portal reports that that distance is 3.6km!! I call this effect the compression and decompression of distance and I'm sure that Bosch has a very reasonable explanation or fix for all this, because paying 500+ Euros for Nyon working like that is not acceptable to my understanding.
Any ideas please? Needless to say, I do have the latest Nyon software as of today.
Thank you all in advance,
Thanasis