G Giuseppe Just Joined Sep 17, 2017 2 0 69 Bromsgrove Dec 11, 2018 #1 Hi New to my Cyclamatic 16" folder question is as I have a broken spoke in my rear wheel. What size would need to replace I think it's 12g plus where would I purchase some from? ?Thanks in advance
Hi New to my Cyclamatic 16" folder question is as I have a broken spoke in my rear wheel. What size would need to replace I think it's 12g plus where would I purchase some from? ?Thanks in advance
wheeliepete Esteemed Pedelecer Feb 28, 2016 2,047 755 60 Devon Dec 11, 2018 #2 Remove the old spoke and measure it's length to the inside of the bend. If it's broken at the hub end, which is fairly normal, then the remaining length, minus the nipple should be close enough. These guys do 12 gauge cut to length. Prob. best order a few spares https://www.customcutspokes.co.uk/shop/bicycle-wheel-spokes/sapim-leader-silver-12g-2-6mm/
Remove the old spoke and measure it's length to the inside of the bend. If it's broken at the hub end, which is fairly normal, then the remaining length, minus the nipple should be close enough. These guys do 12 gauge cut to length. Prob. best order a few spares https://www.customcutspokes.co.uk/shop/bicycle-wheel-spokes/sapim-leader-silver-12g-2-6mm/
Nealh Esteemed Pedelecer Aug 7, 2014 20,126 8,226 60 West Sx RH Dec 11, 2018 #3 What Wheelipete say's, 1 or 2mm longer will be good enough but to get it exact remove a good spoke and measure it.
What Wheelipete say's, 1 or 2mm longer will be good enough but to get it exact remove a good spoke and measure it.