Woosh Gallego power cutting out - control panel issue

Klang180

Pedelecer
Jun 6, 2017
147
12
41
exeter
Hello, my partner uses her Woosh Gallego to commute every day but a few weeks back it started to intermittentlyIMG_20170606_114435556_HDR.jpg IMG_20170606_114505975_HDR.jpg IMG_20170606_114505975_HDR.jpg IMG_20170606_115830651.jpg cut out. The issue is so bad that she doesn't know whether it will go from one second to the next and has had to use her regular bike to commute as without the assist it is just too much effort. We had a similar problem before where we fond the issue to be the connector working loose around the wheel and that resolved itself. However this issue appears more serious and I think I have isolated it to the control panel.

If you look in the pics, the first shows the control panel in its entirety minus a little round cylinder piece about 5mm all-round. In the second picture i have placed this cylinder piece where i think it should go and where i think the problem might be. Am i right in thinking if i solder this part very carefully back in the problem might be resolved?

I am not sure what this cylinder part is and I cannot find a diagram for it online but I can see no other explanation.

Any opinions are gladly received and thanks for taking the time to read this and help.
 

Woosh

Trade Member
May 19, 2012
19,407
16,387
Southend on Sea
wooshbikes.co.uk

Advertisers