Recent content by 4vr4

Hi Graham, Mine started working OK again. Fingers crossed. So I haven't done any replacements yet. Thanks. Tom.

I've emailed Oxydrive, will see if any options. Is there a way to find out wiring diagram for Oxydrive motor? Anyone seen it anywhere?

Hi everyone, Some time ago I've posted my question here - Oxydrive motor noise for noisy motor issue. I've replaced the motor bearing and issue seemed to go away. Used the bike since, all worked well. Recently i have replaced disk brake, what resulted into removing and re-installing front...

overall experience with the kit - i just love it. if you hesitating to buy or not just get it. i couldnt believe how much fun it is.

well took me some time to come back to this. i have replaced the bearing and this solved the grinding noise problem. £2 fix ;) still have some ticking like noise, also only under weight load. if i lift wheel no noise at all. hmmmm...

Trex what do you mean by "check the motor cable"? the connector is 9-pin with 3 pins larger that remaining 6 pins.

Thanks for the suggestions guys. I'll try replacing bearings first. Connectors are all fine. also as i have mentioned in my original post it runs without grinding noise when no load on the wheel applied. Wasn't really sure about that white wire. Anyone here offer service/maintenance on these...

Hello everyone, I've got a used Oxydrive kit off ebay. Was sold as untested. Firstly i've tested it on a bike upside down. All seemed to be OK. Now i've put all the bits together on the bike and tested on the road. Surprise surprise - it's buzzing like a motorbike :))) Here's some video of the...

Perfect. Thanks d8veh.

Just wanted to say Hi to everyone. Great site! I'm new to e-bike. Had an idea to get involved some time ago but time goes quick... So I've got a used Oxygen LS kit. Front hub motor with bottle battery. I haven't tested the kit yet. Hopefully soon will get some time to install it. And a...