AGS's latest activity
-
AGS replied to the thread Puch eMaxi Build.There was one of those at the auction where I got the Puch and it sold for £1100... -
AGS replied to the thread Help! Hall Error 03 Akezbike Hall Sensor.I use hot glue inside my motors. The trouble with high strength glue is it’s too permanent, so if a hall sensor needs changing in the...
-
AGS replied to the thread Puch eMaxi Build.I made a new slimmer battery box because the first one was too bulky and painted it matt black. And I added a ventilation grill for...
-
-
AGS replied to the thread New owner questions - advice pls.If it’s brand new, the brakes won’t have been bed in yet. I bed mine in by doing 15 near stops on the front and then 15 on the back...
-
AGS replied to the thread Display lcd.You have to be careful and really need to find out what controller is fitted to your bike. And even then a compatable display may not...
-
AGS replied to the thread Carrera crosscity folding bike rear hub.There should be more markings on the outside of the case that show the model code. The printing on the halls pcb suggests it’s a Bafang SWX.
-
AGS replied to the thread 03 info during ride.My guess is your motor is getting hot and the hall sensors are shutting down. Then they start working again when they have cooled down...
-
AGS replied to the thread Carrera crosscity folding bike rear hub.It looks to me that someone has tried to fit the wrong gear set to it. Can you post a photo of the engraving on the motor cover?
-
AGS replied to the thread Brake sensors XF08 tektro.I fix them using hot glue and test, so I can easily move them if they need to be adjusted. I don’t bother with the sticky pads that are...
-
-
AGS replied to the thread E-bike lifter.I used to have an upright bike rack mounted on the wall in my garage. Not sure if the OP is trying to do this or mount it on their car...
-
AGS replied to the thread Dual voltage.My KT controller has L settings. It’s L1 where you can set the under voltage value to be manual or automatic.
-
AGS replied to the thread Dual voltage.If you disconnect the battery and then switch on the display power button the capacitors in the controller will discharge and you should...
-
AGS replied to the thread Hub test box - worth doing?.There are different styles on eBay. Some have leds going around in a circle so you can visualise the phases inside a motor and some have...
-
AGS replied to the thread Hub test box - worth doing?.Somebody already makes these in China for £8.30, but a multimeter does the job just as well without any confusing leds...
-
AGS replied to the thread Any ideas? Thanks in advance.If the mosfet test fails then you will need a new controller. It is possible to replace the mosfets, but I don’t think that is something...
