Electric Bikes Conversion Kits EMTBS eRoad/Commuting What's New?

AntonyC's latest activity

  • A
    AntonyC replied to the thread Battery Fires.
    Like this perhaps? Only it isn't about blocking wrong chargers. Some are pressing for enforced non-interchageability between brands...
    • adapter.JPG
  • A
    AntonyC reacted to Peter.Bridge's post in the thread Battery Fires with Like Like.
    I just realised,my sister and her daughters have 3 e-bikes, 2 with 48v 15Ah rack batteries and one with a (Woosh) 36v 20Ah rack battery...
  • A
    AntonyC replied to the thread Battery Fires.
    A house fire thought to have been caused by an e-scooter battery spread to seven neighbouring properties (BBC news). I'm sure you're...
  • A
    AntonyC replied to the thread Battery Fires.
    Agreed when it comes to gross cases but both your examples would simply wear batteries out faster if they had adequate (ideally dynamic)...
  • A
    AntonyC replied to the thread Intermittent loss of power.
    Do they cut out only when the motor's working hard such as climbing? That and both bikes being affected could be down to the batteries...
  • A
    AntonyC reacted to AndyBike's post in the thread Rain effects with Agree Agree.
    I have a built in battery on the down tube, and at the base of that in heavish rain get a little bit gathering at the base inside the...
  • A
    AntonyC replied to the thread Help! My next project.
    If ever there was a dark art it's hub motors in steep terrain. The actual change in assistance may be small but if the remaining...
  • A
    AntonyC replied to the thread Battery Fires.
    What if he was tired and just picked up the wrong charger - jail time? The problem is that some batteries don't have adequate...
  • A
    AntonyC replied to the thread Off grid battery charging.
    Taking the Elejoy for example, it seems a bit odd that there's no mention of the maximum current in their product page, other than in...
  • A
    AntonyC replied to the thread Battery reccomendation for BAFNAG.
    To sort of answer your question, it could be worth searching the forum because one or two have been mentioned not that long ago, only I...
  • A
    AntonyC replied to the thread Help! My next project.
    That's a worthy straw to clutch at as "current" control's not as simple as speed control. With either, at the limit speed the power...
  • A
    AntonyC replied to the thread Help! My next project.
    Maybe brake to reach the dip ghost pedalling at 14mph so that the controller's all set for the climb? On mine brake cutoffs respond...
  • A
    AntonyC reacted to Sparksandbangs's post in the thread Help! My next project with Like Like.
    I think that when you pedal hard past the speed limit the controller decides that it has massively overshot the setpoint and then over...
  • A
    AntonyC replied to the thread More Seizures.
    TLDR: Actually the government is proposing destruction after 48 hours and the public consultation closed on 8th July - it's a shame...
  • A
    AntonyC replied to the thread New Lightweight Yosepower Torque Sensor Hub Motor Kit.
    AIUI the trapezium shaped connector ensures the 9-core comms for motor+TS doesn't get connected to a regular Julet controller lacking TS...
Show older items
Top Bottom