AntonyC's latest activity
-
AAntonyC replied to the thread Help! My next project.Here are some 26" air forks under £120, the next 'band' seems to be £160+. All sound much the same but vary a bit in the details they...
-
AAntonyC replied to the thread Which controller kit do i buy?.Here's a simulated work-out on a random MTB to get an idea of power levels, for example at 45kph from the rider 250W and battery 720W...
-
AIf you buy a KT controller from PSW you can because they have a 9 pin connector for the 1T5 cable. KT controllers listed by Topbikekit...
-
AThere seems to be some confusion here. A motor usually has a 9 pin waterproof male plug on the cable that connects to a 9-pin female...
-
AAre you sure about that? 900w output is 25A at 48v. Ananda says the B5 controller is 20A max, and that's probably at 36v. Is there a...
-
AWait until you see the bill. Sorry best I could do.
-
AYou don't make it clear what you mean by "charge". Do you mean individually or as a pack with or without a BMS? Whatever it is, you can...
-
AAntonyC replied to the thread Kalkhoff Agattu Impulse 2.2015 new to me bike.I'm selling spares from an Agattu i8 HS Cross Bar L, so message me if you need a rack, frame bag etc. And welcome to the forum!
-
AI printed this label on my cheapo laser printer using standard vinyl grey label sheet that you can get from Amazon. If anybody wants a...
-
AAntonyC replied to the thread Mountain bike brake pads.I've come across advice to toe V-brakes out if they're noisy. Yours look set a bit high, the tyre can deflate suddenly if they wear the...
-
AAntonyC reacted to Peter.Bridge's post in the thread Which commuter e-bikes should I shortlist with
Informative.
These look ok with hydraulic suspension and hydraulic disc brakes and 540wh battery https://www.infinityebikes.co.uk/product/eleglide-m2/