Baz the balloon man's latest activity
-
BBaz the balloon man replied to the thread Are E-bikes overpriced?.About 1mm too big probally go with a mallet but vey tight , Might damage the frame
-
-
BBaz the balloon man replied to the thread Are E-bikes overpriced?.This one it’s only a tad higher should be ok if it fits
-
-
BBaz the balloon man replied to the thread Are E-bikes overpriced?.I have one here some where fits Carrera and Raleigh , problem is the Giant is the Large frame so I have the seat at its lowest height...
-
BBaz the balloon man replied to the thread Are E-bikes overpriced?.Morning what type of rear suspension does your bike have , I was using a seat post one with a very good comfortable saddle which I miss...
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.I agree after riding for a while now a throttle unless some one is disabled and needs one is not needed in my opinion on a cycle . What...
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.The spell check on this site is malfunctioning.
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.Nor am I
-
BBaz the balloon man reacted to thelarkbox's post in the thread Help with Bafang Bird bike motor with
Like.
clear the old flex out to see what your dealing with more clearly, it could be a 'shallow' enough pinch to allow a shim to protect the... -
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.A new classification of pedlech is needed just like in 914 when bicycles where made into mop heads Going forward there must be a new...
-
BBaz the balloon man replied to the thread More Seizures.When I was a 14 year old kid , I had a leather biker jacket tassels the works and run Two rock n roll clubs in London had a metal badge...
-
BWhen you crush a 2 ton car, you get about £200 scrap metal from it. When you scrap a 10kg scooter, you'd be lucky to get £1 of scrap...
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.LOL guys thanks for all the grease lightning advise I was looking at the Circup and the collar on the axel where the wire comes out and...
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.I see have not got that far yet !
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.LOL guys thanks for all the grease lightning advise I was looking at the Circup and the collar on the axel where the wire comes out and...
-
BBaz the balloon man replied to the thread Help with Bafang Bird bike motor.With the grease I ment the grease around the inner hub casing it seems to be more of a silica rather than say cooper ease or general...
