Benjahmin's latest activity
-
Benjahmin replied to the thread Help! My next project.I've changed C14 to 3. I think it's made an improvement, hard to tell. Here's what I saw: Trundling along on 2, I came to a steep bit... -
Benjahmin replied to the thread Help! My next project.Good to know, I will persevere. Although I've been a utility and leisure cyclist since I first rode a bike (roundabout 5 or 6 I think)...
-
Benjahmin replied to the thread Help! My next project.Just found my original thread when I bought the kit. After much back and forth I ended up with a 48v 328rpm, so running it at 36v...
-
Benjahmin replied to the thread Help! My next project.That I can't remember, there was so much back and forth when I bought it. I originally bought it for a 26" wheeled recumbent. I do know...
-
Benjahmin replied to the thread Help! My next project.I've moved the throttle to the right which means the up/down buttons are now closer to the left grip. I can reach both easier now. 25...
-
Benjahmin replied to the thread Help! My next project.Just been on a 15 mile ride, think I'm starting to the feel of it. The advice of using the throttle on short ramps/climbs is certainly...
-
Benjahmin replied to the thread Help! My next project.Just been to the next village to get my artisan baked sourdough - I know ! :rolleyes::cool: Any way system set to 20A seems a lot...
-
Benjahmin replied to the thread Help! My next project.I went as recommended on the Grin site, their recommendation is to keep to one cross. In retrospect maybe they're more used to 26 inch...
-
Benjahmin replied to the thread Help! My next project.That's interesting Sturmey, I hope you're right. It's puzzling though because, if the windings are on the outside, wouldn't this need...
-
Benjahmin replied to the thread Help! My next project.Yeh, checked that and it is as you say. I think the rather underwhelming performance is a mixture of wrong wheel size, 17A maximum...
-
Benjahmin replied to the thread Help! My next project.Just found that wheel size was set to 26" instead of 700c, that's part of why it all felt a bit tame. C5 now set to 9 which should give...
-
Benjahmin replied to the thread Help! My next project.Been out on a shakedown run. Firstly the steering is much lighter and the motor much quieter. Previous system was speed control and it's...
-
Benjahmin replied to the thread Help! My next project.The rack battery has too much life left in it and I have no other use for it. Plan is to use it up then get a 48v downtube battery.
-
Benjahmin replied to the thread Help! My next project.Haven't had chance to try it yet. All the weight is now on the rear end so not sure how it's going to feel.
-
Benjahmin replied to the thread Help! My next project.I forgot the brake switch. I used a hydraulic switch and used an old cycle computer magnet cable tied to the brake pipe. Switch is...
-
