Bikes4two's latest activity
-
BWaste of time. Just write two sentences saying what sets it apart from the other million similar bikes. None of these low end bikes are...
-
BBikes4two reacted to Woosh's post in the thread Customer Review of the Q70 kit for the Brompton with
Like.
A customer sent Andy his YT review of the Q70 conversion kit for his handsome Brompton. His rock solid bracket option for using the... -
BAlso for fine manoeuvres such as getting through awkward restrictions; you don't want the motor to kick in in when you make a small turn...
-
BBikes4two reacted to Peter.Bridge's post in the thread Hydraulic disc brakes with ebike cutout with Like.
They are also quite useful changing down gears when you come to a junction , where you want to pedal to change gears but don't want the...
-
BBy all means wear a helmet if you wish and do take care anyway, but I've never worn one in over 70 years of cycling and have just...
-
BBikes4two reacted to UnclePuncher's post in the thread Suntour HESC system doesn't work after replacing pedal sensor. with Funny.
Apologies all. I'm an idiot. I've never worked on one of these. They don't kick in when in the workstand. You have to actually stand on...
-
BBikes4two reacted to saneagle's post in the thread X35 DIY aliexpress solution to dead battery with Like.
The problem is when you have the wrong speed sensor setting in the controller for the actual speed sensor you have. The motor starts up...
-
BBikes4two reacted to guerney's post in the thread So who is a internet parts finding sleuth? with Like.
Perhaps? https://eu.super73.com/en-gb/collections/batteries/products/battery-mount-for-pro-battery-2p-3p...
-
BBikes4two replied to the thread X35 DIY aliexpress solution to dead battery.That's understandable but TBH in the absence of the necessary knowledge that is most likely why you were unable to get the X35 motor...
-
BBikes4two reacted to Peter.Bridge's post in the thread X35 DIY aliexpress solution to dead battery with Like.
OMG - that's impressive - although I think you could do a much simpler build by just ripping out all the internal Mahle stuff (battery...
-
BBikes4two replied to the thread X35 DIY aliexpress solution to dead battery.Hi @stevebry I don't know if you've seen the YT vid by 'Ebike repairs' (link) in that after Mahle X35 problems he successfully re-used...
-
BThere is a low voltage EU directive for DC powered tools etc,etc , with I think approx.70v being the max for hand held /usage items...
-
BAnother opportunity to discuss what 'rated' means!
-
BBikes4two replied to the thread Some advice for a ebike newb.As I understand it this stems from BS EN 15194 which is the European and British Standard for EPACS and defines the max voltage for an...
-
-
BBikes4two replied to the thread TSZD2B clutch failure. Any tips on replacement?.Good to know - I had the 'slipping clutch' symptom on a TSDZ2 as per the vid. I was able to press in a replacement, no problem BUT...
