Recent content by bluebus

Thanks very much for the advice! As a temporary measure I have plugged in a throttle to the existing controller and ordered a new 24/36v controller and magnetic PAS. The optical sensor is indeed toast and I look forward to fitting a new set up! All the best Bluebus

Hi Nealth The battery is an older Nimh version... but seems to be giving enough juice tk run the 24v motor. The sensor is a 3 wire sensor... 12v at power but no signal coming down the blue signal wire. Thanks for any help and advice Bluebus

Hi Everyone I have been working on an Urban Mover 44 24v I recently acquired. Battery reading healthy 26V but still no movement! I have checked the motor by supplying 5v power along the signal wire from the pedal sensor to the motor and all is running well! As such it seems the issue is with...

Thank You so much for all your advice and guidance. Strangely the cells in the battery pack have increased voltage from 1.1v after charging to a healthier 1.30v 7 days later. The pack is now reading 26v after reading c. 20v for 6 days running. Will try pack back on the bike but definitely like...

Hi All, I was recently given a non running urban Mover UM44 with the older type Nimh 24v 8 ah battery. first thing I charged the battery which was showing full power on the battery indicator light when disconnected. I have checked the 24v battery after a charge which is reading just over 20v...