Recent content by BudgetBodger

The cube Delhi looks perfect if a touch more than I was intending to pay. Will keep going through his eBay shop, otherwise will drop him an email.

Unfortunately I didn't see anything that fitted the bill close enough to London for pick up. The carrera Vulcan would be a winner if it wasn't too far away

Bankrupt looks great when they have the parts in stock! I have also found the stealth bomber frames, which you can put the battery inside, but I suspect they will get me more attention from the old bill than I want if I put something bigger than 250w on it. Thanks all for the ideas...

Hi all, The inevitable has happened when you put a battery on a seat post only rear rack, along with a generously weighted rider.... I have full on snapped my cheap Chinese full suspension frame. So, I have a 26in voilamart 250w front wheel, Shimano alfine 8 rear IHG, Clarks M2 hydraulics...

Hi All, I have a Voilamart 250w front hub and controller, that is nominally 36V. I know I can work out the max voltage by opening up and inspecting components, but just before I do I wondered if anyone else had beaten me to the punch? (My bike lives outside, and takes a fair bit of abuse, so...

Long time lurker, first time poster. If you have no need to disconnect the battery holder assembly from the controller, then solder the cable together and heat shrink. If you do need to remove the battery holder semi-regularly because you are still tinkering, then my solution is to use Wago 221...