Cadence's latest activity
-
Cadence replied to the thread Crank removal.Tighten the tool as much as you can without rounding the flats on it, then give the end a single hefty blow with a decent sized mallet... -
Cadence replied to the thread More Seizures.Yes, I did think about that, but if you have brake cutouts the coppers can't do it that way. One of my bikes has a KT-TF01, which...
-
Cadence replied to the thread More Seizures.I'm probably just being thick here, so please correct me if I am. I just did a back wheel in the air test on my bike with an LCD3...
-
Cadence replied to the thread What shifter to match bike derailleur.I bought these from Ali when I swapped my v brakes for discs. You can buy as a set or single. ￡8.45 | SHIMANO Altus SL-M315 SL-M310 MTB...
-
Cadence replied to the thread Help! My next project.Can't say I've noticed this problem, but then I tend to take advantage of gravity to freewheel down slopes! Does stopping pedalling for...
-
Cadence replied to the thread New chain !.I read a recommendation somewhere on t'internet that 90% EP90 gear oil mixed with 10% sewing machine oil is a good mix for bike chains...
-
Cadence replied to the thread Are E-bikes overpriced?.You're not supposed to "hit it with a mallet"! 1mm is way too big. Seat posts come with the size stamped on them. If you don't have the...
-
Cadence replied to the thread More Seizures.Couldn't even be bothered with any pretence by fitting a chain!
-
Cadence replied to the thread Don't get no respect. Wife doesn't like new conversion..Maybe it's the wrong colour, or it's just plain ugly. After nearly fifty years I've come to realise that the more I second guess how to...
-
-
Cadence replied to the thread Help! My next project.Have you tried setting C14 to 3? In the Chinglish instructions this is 'assist strength of intelligent pedal motor". My KT's came set on...
-
Cadence replied to the thread Yose power.You can buy the "350w" 18amp controller from Yosepower to use with your 250w motor. They are available integrated into the battery...
-
Cadence replied to the thread Help! My next project.I can concur. I just had to try my recently acquired 48v. battery (bought for my hybrid fitted with a Yosepower 250w. cassette motor) on...
-
Not in their eyes. They'll ask the manufacturer (eg Suntour), what they think of your modification. They'll simply say that it's unsafe...
-
Cadence replied to the thread Yose rear hub spanner size.It's 18 mm on the rear hubs.
-
Whilst what you're proposing will probably work, you're leave yourself wide open to a lawsuit and/or potential prosecution if you sell...
