cannon's latest activity
-
Ccannon reacted to Benjahmin's post in the thread Electric Bike for light touring - and Halfords with
Like.
Hi Marnet, The bike in my avatar is a Carrera Crossfire. I put an Ezee front hub on it (probably too big and torquey for you) about 5... -
Ccannon replied to the thread E-Bike Rolling Road !!.In past videos the presenter does and continues to push the dialog along far too quickly for most and details are missed etc. but it is...
-
CI saw this on my YouTube feed and thought it may be of interest..... and a bit of fun once testing starts. Ray, who made the rolling...
-
Ccannon replied to the thread Help! BBS01 help required with programming.I had a similar problem a short while ago, the original seller even sent a replacement lead which still did not work so I tried the one...
-
Ccannon replied to the thread Rechargeable heated gloves.The best way to keep anything warm is to keep the wind off. Motorcyclists have been using the bar mitts for years with great results and...
-
Ccannon replied to the thread Chain Durability 8, 9, 10, 11, 12 speed.Thanks for the reply. Normally with mechanical items as long as the component is not overloaded and breaks, a increased load leads to...
-
Ccannon posted the thread Chain Durability 8, 9, 10, 11, 12 speed in Conversion Kits General Discussion.I'm still fairly new to ebiking so please forgive me if this has been covered before, a quick search didn't reveal much. There have...
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.Yes, my ebike conversion has also got me back into cycling too, it is a great match for hilly West Wales. I must admit I didn't fit...
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.I must fess up it was not my idea, saw it somewhere on 't interweb
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.I have also used metal epoxy, same as JB weld I think, a few times and always carry some when on a motorcycle trip, very handy stuff. My...
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.Sugru comes in small sachet's so one wastes very little. When I attached the brake sensor I also moulded some around the inlet and...
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.Absolutely, just have a look on youtube. I've also used it attach mini DRL's to a motorcycle and extend a mudguard on the emtb.
-
Ccannon replied to the thread Review Bafang BBS01b 250w DIY fitting - traps, pitfalls and review.I recently fitted a brake some hydraulic brake cut off's with Sugru, it's very versatile stuff and perfect for something like this.
-
Ccannon replied to the thread Another mid drive.It is about time the gearbox was integrated with the motor. Current e-bikes remind me of vintage motorcycles when they had separate...
-
Ccannon replied to the thread Climbing Hills with a BBS01.I made an error in my previous post, the second part should read "Next I put the keep current down to 50% and the "rev limit" for levels...