cer's latest activity
-
Ccer reacted to Waspy's post in the thread Front of bike (headset or suspension) doesn't feel right with
Like.
That would be my guess too. -
Ccer reacted to saneagle's post in the thread Front of bike (headset or suspension) doesn't feel right with Like.
It's getting complicated now, and you forgot the spokes. Let5try and make it simple: Grab the top of the front wheel and pull it side...
-
Ccer reacted to Waspy's post in the thread Front of bike (headset or suspension) doesn't feel right with Like.
I would also check the brake rotor bolts are tight and the caliper bolts (and caliper adaptor bolts) are tight. Not a bad idea to go...
-
Ccer reacted to saneagle's post in the thread Front of bike (headset or suspension) doesn't feel right with Like.
Good points, well presented! Just to expand on the second one, the spacer arrangement should result in a way where the cap remains...
-
Ccer reacted to Waspy's post in the thread Front of bike (headset or suspension) doesn't feel right with Like.
First thing is make sure the front wheel axle is fitted properly in the front fork drop-outs, then make sure the quick-release lever is...
-
Ccer reacted to saneagle's post in the thread Front of bike (headset or suspension) doesn't feel right with Like.
With the stem clamp bolts released, you tighten the cap screw until you can feel a little tightness in the bearings when you turn the...
-
Ccer posted the thread Front of bike (headset or suspension) doesn't feel right in Electric Bike General Discussion.Hi, A week or so ago I posted about an issue I had with the rear wheel of a cheapo E-bike I bought (Hitway BK15). The post replies...
-
CStandard bike disc brake screws are too long. You should use the ones that come with the motor, otherwise get replacements that are...
-
Ccer replied to the thread Stiff rear wheel.Thanks everyone for the replies. I can now confirm it was actually the disc brake rotor that was causing it! After removing it, the...
-
CIf you changed the screws at the same time of the disc, that's probably it, though they look like the correct ones in the photo. The...
-
CDisc bolts would be my first thought. Second would be the smallest cog of the gear cluster rubbing on the frame. It's not possible to...
-
Ccer replied to the thread Stiff rear wheel.I haven't tried that, but I did actually replace the original disc brake rotor because it was slightly warped and I decided to get a new...
-
CHave you tried removing the brake disc and spinning it? Perhaps the disc bolts are too long and catching the motor inside?
-
CDoes it spin freely when out of the frame?
-
CIt's impossible to say what you did wrong without seeing photos. Either you had the washers in the wrong sequence or your disc out of...