Recent content by craigp

My meter is working correctly. I checked it yesterday using my dc bench power supply. I have just checked some of the voltages again and they are discharging themselves. the main battery voltage is now down to 4.8v I'm guessing there is some short circuit in either the bms or the cells...

here are the voltages after being disconnected overnight Main Battery Terminals - 6.22v Pin 1 - ground Pin 2 - 2.127v Pin 3 -1.759v Pin 4 -1.720v Pin 5 -1.716v Pin 6 - 5.04v Pin 7 -8.35v Pin 8 -8.24v Pin 9 -8.24v Pin 10 - 8.24v Pin 11 - 8.17v Pin 12 -6.46v Pin 13 -6.22v

I have just rechecked with the connector disconnected by probing the pins on the connector and also at the tabs on the battery and they are all correct. yes my multi meter is working correctly. And have also tested with the charger disconnected now with the same result. with the charger...

I thought it would be easier if I reply here on behalf of bryan. I have tested the dc input and have the correct voltage of 42v. I have tested each wire on the white connector whilst charging (green light on charger) and the voltages are as follows : Pin 1 - ground Pin 2 - 3.4v Pin 3 - 6.79v...