eas2lv's latest activity
-
Eyes, I could but I don´t like badmouth the competitors because it´s not my style. I only like to say, from a technological standpoint...
-
Eeas2lv reacted to saneagle's post in the thread Bosch Explains All the forthcoming new regulations with
Like.
I think that Bosch guy made a lot of sense with what he said. 750w maximum power output would be easy to measure. It's roughly 22A at... -
Eeas2lv replied to the thread Ebike News.Man shoving shopping cart onto a cyclist
-
EI would have been able to tell you where the controller was and what to do with it if you had answered my question about which version...
-
Eeas2lv replied to the thread Ebike News.This a misleading video as it fails to mention that, Irish Road Tracffic act "defines a mechanically propelled vehicle as one, inter...
-
Eeas2lv replied to the thread Swytch Mk3 Air problem with third-party hub.If you are using original Swytch SW102 display, the speed magnets is hardcoded (n=6 in kits I've used) in the display firmware and...
-
Eeas2lv replied to the thread Front hub kit suggestions for Brompton clone with 20 inch wheel.> I'd prefer something lower down rather than the swytch-style handlebar mounted batteries I know Swytch is universally hated here, but...
-
Eeas2lv reacted to matthewslack's post in the thread Setting a speed limit on bafang mid drive with Dislike.
Going back to controller and algorithm, which ties in with your response, this is how I would approach it: To accommodate a wide range...
-
Eeas2lv replied to the thread Making a torque throttle instead of a speed throttle for a cheap controller.yeah, I missed the qualifier "for your Lishui one".
-
Eeas2lv replied to the thread Making a torque throttle instead of a speed throttle for a cheap controller.> KT controllers work differently to yours. Each pedal assist level is a different power, and all allow you to reach the global maximum...
-
EThat's pretty funny Dave. I know that one of us has a post graduate qualification in Research Methods and Statistics. If you have one...