Fordulike's latest activity
-
That’s great thanks, when I bought the spanner to assemble, I bought the program cable as part of the pack but I was initially wary of... -
Fordulike replied to the thread Bafang PAS vs Throttle.Here is a guide on programming the Bafang mid drive. It's a little hard to digest for newcomers to the programming side of things, but...
-
Fordulike replied to the thread Bafang PAS vs Throttle.You'll need a programming cable as mentioned in this thread...
-
Fordulike replied to the thread White Lightning Clean Ride, anyone use it?.I use one of these bike stands to lift the rear wheel off the floor, when using the chain cleaner or lubing the chain: Bike stand...
-
Fordulike reacted to Steve J H's post in the thread White Lightning Clean Ride, anyone use it? with
Informative.
Tried Clean Ride last year and found it performed as advertised, very quiet and smooth drive train. Particularly like the way the wax... -
Fordulike reacted to vfr400's post in the thread White Lightning Clean Ride, anyone use it? with Informative.
I tried it. I'd say totally useless. It didn't make the ride any better than gear oil, and each application migrated from the chain to...
-
Fordulike replied to the thread Ebikes and the Unfit Very Heavy Rider - A Cautionary Tale for Newcomers.I agree with vfr400. You have to look at the bigger picture and buy accordingly. If you are on the heavier end of the scale, then a...
-
Fordulike replied to the thread White Lightning Clean Ride, anyone use it?.http://www.finishlineusa.com/products/chain-lubricants/dry-lube I use this one because it is very good in dry conditions, but not so...
-
Fordulike posted the thread White Lightning Clean Ride, anyone use it? in Electric Bike General Discussion.Thinking of swapping my lube of choice over to this stuff. Does anyone use it, or something similar, and what are your experiences?
-
-
Fordulike reacted to Propellorhead's post in the thread Intermittent PAS problem on BBS01B with Informative.
Problem "solved" - bought a BBS01B bare motor (no accessories) from greenbikekit. Costs about 60% of complete motor. Bike now works...
-
https://www.bbc.co.uk/news/business-55734277 "Some specialist European retailers, such as bicycle part firm Dutch Bike Bits and...
-
This could explain the problem. Alot of companys are not going to want to become UK tax collectors...
-
Fordulike replied to the thread Where to get Statorade Ferrotec APG1110 in UK.What's the max amp rating of your controller? I've read, over on Endless Sphere, that riders who use that stuff in their hubs are...
-
Fordulike reacted to Nealh's post in the thread Where to get Statorade Ferrotec APG1110 in UK with Agree.
It's usually used as a motor coolant for hot rodding hubs with much higher current and voltage , for most use installing the hub...
-
Fordulike replied to the thread What is everyone's opinion on this set up?.You can stay legal by going for a BBS01 250w instead. There are certain tweaks that can be done with a programming cable, that will...
