Garry Hallam's latest activity
-
GGarry Hallam replied to the thread Motor Id.Next theoretical question is would a 36v KT Controller work at 24v?
-
GGarry Hallam replied to the thread Motor Id.Looks like a 36v 350w motor run at 24v would be an ideal switch from a 20 to 26"wheel. Giving 233w to remain legal. Technically I guess...
-
GYou can run it at 24v to get 2/3 maximum speed, but then the power goes down by 2/3 too.
-
GGarry Hallam replied to the thread Motor Id.I Just downloaded a few different Stroboscope apps from google play and Stroboscope Engineer seems to perform reasonably well on tests...
-
GGarry Hallam replied to the thread Motor Id.I connected the motor to my Argos Emove to compare speeds. It looks to be of similar speed. If I wanted to now put this on a 26" wheel...
-
GGarry Hallam replied to the thread Review of Argos £245 E-move folder.Thanks, I came to that conclusion after talking to the seller on the Sunday Market. But I have not tried it yet. I do hope you are right...
-
GNo you don't. I figured it out for you today. You're pressing the button too long. It only switches off with a short press. You need a...
-
GGarry Hallam replied to the thread Review of Argos £245 E-move folder.Looks like I will need a new display. Do you know what type they are?
-
GGarry Hallam replied to the thread Review of Argos £245 E-move folder.The display controller is playing up on my bike. I will check connections but It will not power off sometimes without switching off at...
-
GIt's not a fatbike motor. It's an ordinary ebike one with an extra 15mm stuck on the side for the band-brake. It's the same motor as the...
-
GGarry Hallam replied to the thread Motor Id.I wondered that too. Would fat bikes use band brakes do you think?
-
GGarry Hallam replied to the thread Motor Id.Cool, I was hoping you would notice. Thanks
-
GThe speed sensor is staring you in the face. It's on the pcb by the axle and marked JP4.Its connection to the white wire is marked SP...
-
GWe know it is a Bafang hub motor , the width may suggest it is for a fat tyre bike .
-
GGarry Hallam replied to the thread Motor Id.I will just have to test it on the controller when it arrives. I cannot find any info on the motor anywhere. I opened it up but despite...
-
