gazza19's latest activity

  • G
    gazza19 replied to the thread Cyclematic powerplus.
    hi i have just changed over to a 36volt battery do i have to change any parameter settings thanks in advance for any help given
  • G
    gazza19 reacted to Nealh's post in the thread Cyclematic powerplus with Like Like.
    C10 is factory reset select Y.
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    it was showing before i set the p and c parameters up when i press the up and down buttons together is shows end where the motor reading...
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    Does anyone know why i am getting a sour 2 on my my lcd3 please and how to rectify it also I’m getting an end on the motor part
    • image.jpg
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    thank you vfr400
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    thank you just another question what ampage ones would you use as the wire is only thin isnt it
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    thank you pal sorry i didnt explain it right the pedal assist in the pic is for a coyotte connect electric bike im hoping to use a spare...
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    Here are the new and old pas sensors on the new one its all male connectors on the controller side its two male and a separate female...
    • 4B581C48-216F-4D0C-9BBB-AF68DE0ECCCA.jpeg
    • image.jpg
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    thank you neath for replying il set it all up in next couple of days and hopefully it all works ok just hope the throttle works properly too
  • G
    gazza19 reacted to Nealh's post in the thread Cyclematic powerplus with Like Like.
    P1 start with 84 set the speed in the previous menu to 25km/h and go for a ride with a GPS readout to see how far out the lcd reading is...
  • G
    gazza19 reacted to vfr400's post in the thread Cyclematic powerplus with Like Like.
    You probably have the wrong connection sequence. The wires don't necessarily go colour to colour when you fit a different controller...
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    Hi neath this is the pas sensor I got with the kit it is a ten magnet one thank you for all the info you sent
    • 81ACA01B-2904-4302-A287-F7675E7DF503.jpeg
  • G
    gazza19 replied to the thread Cyclematic powerplus.
    Hi im wondering if anyone can help me please. I have a cyclematic powerplus 24v 250watt motor bike and ive just fitted a kt lcd3 does...
  • G
    gazza19 reacted to vfr400's post in the thread Cyclematic powerplus with Like Like.
    If you don't want to solder or cut wires, that won't work. Do what I said further up. Cut about 6" of innertube; slide it over the...
  • G
    gazza19 reacted to Nealh's post in the thread Cyclematic powerplus with Like Like.
    XT60 are ideal but you need to be able to solder, I use them or the 90's. Occasionally you get a bad contact because the M/F pins...