Recent content by gazza19

  1. G

    Cyclematic powerplus

    hi i have just changed over to a 36volt battery do i have to change any parameter settings thanks in advance for any help given
  2. G

    Cyclematic powerplus

    it was showing before i set the p and c parameters up when i press the up and down buttons together is shows end where the motor reading normally is there a wat to set it back to factory settings and try again
  3. G

    Cyclematic powerplus

    Does anyone know why i am getting a sour 2 on my my lcd3 please and how to rectify it also I’m getting an end on the motor part
  4. G

    Cyclematic powerplus

    thank you vfr400
  5. G

    Cyclematic powerplus

    thank you just another question what ampage ones would you use as the wire is only thin isnt it
  6. G

    Cyclematic powerplus

    thank you pal sorry i didnt explain it right the pedal assist in the pic is for a coyotte connect electric bike im hoping to use a spare bike thats why i was asking if i can terminal block it
  7. G

    Cyclematic powerplus

    Here are the new and old pas sensors on the new one its all male connectors on the controller side its two male and a separate female would I be able to block connect the two male and the female together as i haven’t got the female new parts for them it’s for a coyote connect that I’m hoping to...
  8. G

    Cyclematic powerplus

    thank you neath for replying il set it all up in next couple of days and hopefully it all works ok just hope the throttle works properly too
  9. G

    Cyclematic powerplus

    Hi neath this is the pas sensor I got with the kit it is a ten magnet one thank you for all the info you sent
  10. G

    Cyclematic powerplus

    Hi im wondering if anyone can help me please. I have a cyclematic powerplus 24v 250watt motor bike and ive just fitted a kt lcd3 does anyone know what the p and c parameters are for this bike please also when i press the throttle sometimes it kicks in and other times it does not any help would...
  11. G

    Cyclematic powerplus

    Would this do to extend the battery connections to the controller connections decided to put it in a bag as scared of breaking wires trying to get it inside the space obviously I’d get the male part too...
  12. G

    Cyclematic powerplus

    This is the controller I got and this the space for it to go in
  13. G

    Cyclematic powerplus

    No don’t think so the batter part where the battery connects to goes into the compartment I have tried all sorts of ways to get it but just won’t go in this a pic of the connector from the wheel the cable would connect to the controller am I right in saying this
  14. G

    Cyclematic powerplus

    Vfr400 yea it does pal then goes to the controller
  15. G

    Cyclematic powerplus

    to do that tho would have to open the motor up and im no good at stuff like that